COMMENCAL Meta TR 29" Rolling Chassis - 2022 Model

The COMMENCAL Meta TR 29" Rolling Chassis 2022 model with suspension fork, shock and wheels

The COMMENCAL Meta TR Rolling Chassis for 29" is the right basis for a playful, dynamic trail bike. In addition to the 2022 model frame, it includes a RockShox ZEB Ultimate suspension fork with 160 mm travel, a Fox Racing Shox X air shock and a bc original Loamer MK2 wheelset with either Shimano micro-spline or SRAM XD freehub. The components are not pre-assembled. A characteristic feature of the 2022 frame generation is the flip chip on the shock mount, which allows you to adjust the geometry to your needs and riding style. The bc Loamer wheels with aluminium rims stand out for their low weight combined with high stability and durability. With the suspension fork, you can set high- and low-speed compression completely independently of each other, and with DebonAir+ and ButterCups you benefit from outstanding responsiveness. The Fox Float X Factory shock offers you low-speed compression and a 2-position lever for quick adjustments on the go.
Playful kinematics make the Meta TR dynamic, while double-row bearings on the frame prevent loss of rigidity at the joints. The result is a bike that delivers high performance both uphill and downhill, and won't let you down on difficult passages. Shock hardware, a matching headset and a seatpost clamp are also included, so you can start setting up straight away.

Specifications:

Application:

All Mountain, Enduro

Wheel Size:

29"

Front Travel:

160 mm

Rear Travel:

140 mm

Size:

S, M, L, XL

Front Triangle Material:

aluminium (6066)

Rear Triangle Material:

aluminium (6066)

Linkage Design:

supported single hinge

Components:

Frame:

COMMENCAL Meta TR 2022, Flip Chip, 12 x 148 mm (Boost)

Fork:

RockShox ZEB Ultimate RC2 DebonAir+, gloss black, 1.5 tapered, 44 mm offset, Disc PM8 (direct mount 200 mm), ButterCups, 15 x 110 mm (Boost)

Rear Shock:

Fox Racing Shox Float X EVOL LV 2POS Factory

Headset:

Cane Creek ZS44/28.6 - ZS56/40

Wheels:

bc original Loamer MK2 Boost, aluminium, hookless, 28 mm jaw width, 6.5 mm Presta valve hole, tubeless ready, Center Lock Disc

Note:

The individual components are not pre-assembled. To install the shock, the supplied bushing set is sufficient for the upper shock eyelet and the mounting bolt on the frame for the lower shock eyelet.

Technical Information - Frame:

Wheel Standard:

12 x 148 mm (Boost)

Axle Type:

12 mm thru-axle

Seatpost (Ø):

34.9 mm

Seatpost Clamp(Ø):

38.5 mm

Head Tube:

1 1/8" - 1.5" tapered

Headset:

ZS44 - ZS56 (top to bottom)

Recommended Fork Axle to Crown:

551 mm

Recommended Fork Travel:

150 - 160 mm

Bottom Bracket Standard:

Press Fit BB92

Shell Width:

92 mm

Chainstay Guide:

ISCG 05

Brake Mount:

disc PM8 (direct mount 200 mm)

Front Derailleur Mount:

not possible

Rear Shock Eye-to-Eye Measurement:

210 mm

Rear Shock Stroke:

55 mm

Rear Shock Bushing Width:

20 mm x 10 mm / 20 mm x 10 mm

Bottle Cage Mounts:

1

Approved For:

Rotor Size (max.):

220 mm

Tyre Size (max.):

29 x 2.5" (rear), 29 x 3.1" (front)

Note:

For individual tyres, tyre clearance must be checked with the fork fully compressed and the tyre fully inflated. It should be at least 6 mm all around.

Chainrings:

1x

Features:

• RockShox ZEB Ultimate suspension fork with vibration-absorbing ButterCups, high- and low-speed compression damping and low-speed rebound
• Fox X Factory shock with low-friction Kashima coating, rebound and low-speed compression settings, additional 2-position lever (Open / Firm)
• sturdy, resilient and lightweight bc Loamer wheelset with aluminium rims
• with flip chip on the damper mount to adjust the geometry
• dynamic linkage design
• designed for rather short fork offset
• double butted frame tubes
• rather steep seat tube angle for a good uphill riding position
• enduro bearings for high rigidity and performance

Geometry:

S:

Recommended Height:

160 - 171 cm

Stack:

626 mm (low), 623 mm (high)

Reach:

440 mm (low), 444 mm (high)

Seat Tube Length:

380 mm

Effective Top Tube Length:

566 mm (low), 565 mm (high)

Head Tube Length:

110 mm

Chainstay Length:

435 mm (low), 434 mm (high)

Wheelbase:

1203 mm (low), 1202 mm (high)

BB Drop:

33 mm (low), 29 mm (high)

Seat Tube Angle:

78.6° (low), 79° (high)

Head Tube Angle:

64.5° (low), 65° (high)

M:

Recommended Height:

170 - 181 cm

Stack:

630 mm (low), 627 mm (high)

Reach:

465 mm (low), 469 mm (high)

Seat Tube Length:

420 mm

Effective Top Tube Length:

592 mm (low), 591 mm (high)

Head Tube Length:

115 mm

Chainstay Length:

435 mm (low), 434 mm (high)

Wheelbase:

1230 mm (low), 1229 mm (high)

BB Drop:

33 mm (low), 29 mm (high)

Seat Tube Angle:

78.6° (low), 79° (high)

Head Tube Angle:

64.5° (low), 65° (high)

L:

Recommended Height:

180 - 191 cm

Stack:

634 mm (low), 631 mm (high)

Reach:

490 mm (low), 494 mm (high)

Seat Tube Length:

440 mm

Effective Top Tube Length:

618 mm (low), 617 mm (high)

Head Tube Length:

120 mm

Chainstay Length:

435 mm (low), 434 mm (high)

Wheelbase:

1257 mm (low), 1256 mm (high)

BB Drop:

33 mm (low), 29 mm (high)

Seat Tube Angle:

78.6° (low), 79° (high)

Head Tube Angle:

64.5° (low), 65° (high)

XL:

Recommended Height:

190 - 203 cm

Stack:

638 mm (low), 635 mm (high)

Reach:

515 mm (low), 519 mm (high)

Seat Tube Length:

460 mm

Effective Top Tube Length:

644 mm (low), 643 mm (high)

Head Tube Length:

125 mm

Chainstay Length:

435 mm (low), 434 mm (high)

Wheelbase:

1284 mm (low), 1283 mm (high)

BB Drop:

33 mm (low), 29 mm (high)

Seat Tube Angle:

78.6° (low), 79° (high)

Head Tube Angle:

64.5° (low), 65° (high)

Contents:

• 1 x COMMENCAL Meta TR 29" frame, 2022 model
• 1 x RockShox ZEB Ultimate RC2 DebonAir+ Boost suspension fork (not pre-installed)
• 1 x Fox Racing Shox Float X EVOL LV 2POS Factory shock (not pre-installed)
• 1 x bc original Loamer MK2 Disc Boost wheelset (front wheel and rear wheel) (not pre-installed)
• 1 x COMMENCAL bushing set
• 1 x 3min19sec SC2 seatpost clamp
• 2 x bc basic tubeless valves
• 1 x rolls bc basic rim tape
• 2 x 304 mm spare spokes
• 2 x spare nipples
• 2 x spare washers