MaXalami Basic Tube Tubeless Repair Tyre Patch Set

The patch set for tubeless tyres in a practical package: the Basic Tube Tubeless Repair Patch Set by MaXalami

Now the Maxalami patch set packed in a plastic cylinder with a loop can be conveniently carried in or on your backpack, so you always have it handy without having to search for it for a long time.

The idea for this product came to seven-time German MTB marathon champion Max Friedrich during one of his stays in South Africa, where he saw a similar system. However, this did not meet the high standards of the engineer and racer. This is why he decided to launch his own brand in Europe. Since you sometimes have to apply a lot of force during assembly, the tool of the MaXalami set is stronger. The patches can be cut to size and close even large holes.

The MaXalami patch kit repairs tubeless tyre damage directly on the trail in seconds, without removing the tyre. Treat the damaged area with a cleaning tool as required. Then the MaXalami is pressed directly into the tyre hole with the help of the installation tool. It seals cuts up to 10 mm without any further aids. After removing the insertion tool, simply pump up the air, check for leaks and off you go!

Technical Information:

Application:

tubeless tyres

Size (LxW):

100 mm x 3.5 mm

Other:

flexible, portionable

Instructions:

1. Clean the hole with a cleaning tool if necessary
2. Shorten MaXalami strips to 5 cm
3. Thread the MaXalami into the insertion tool
4. Pre-prepared insertion tool
5. Insert the tool tip in the hole
6. Press through until just before the patch end
7. Hold the MaXalami firmly and pull out the insertion tool again
8. Turn the repaired parts downwards so that the sealing milk can combine with MaXalami
9. Done!

Tip for Racers:

• With larger holes, several MaXalamis can also be used, or you can simply stuff the ends into the hole again or turn the tool during the entire insertion process.
• Use the MaXalami untrimmed (10 cm). This way you no longer need to pay attention to how far you insert the tool. Saves a few seconds.
• Simply push it in until contact!

Contents:

• 3 x MaXalami patches (3.5 mm)
• 1 x inserting tool
• 1 x plastic cylinder
• not incl. cleaning tool