Nicolai Argon GX Frame

The Argon GX frame from Nicolai is an excellent base for a fast and smooth gravel or cyclocross bike. It features a Flat Mount brake mount and can be combined with a suspension fork. Large tyre clearance and three bottle cage mounts make it suitable for bikepacking adventures off the beaten track. Fender and pannier rack mounts are there when you need them, but won't stick out if you prefer a cleaner look. The frame is ready for internal cable routing and is thus also compatible with a dropper post. The cable outlet under the bottom bracket is protected from dirt. The additional guide clip at the dropout is a thoughtful detail, as it lays the shift cable sleeve at an optimal angle to the rear derailleur over the last few centimetres. The rather long top tube and the resulting longer reach, combined with a flat head tube angle and longer chainstays, enable you to achieve sporty speeds and enjoy smooth handling with high stability, especially on unpaved ground. Careful weld work makes the frame particularly robust and creates the signature Nicolai weld seams.

Specifications:

Application:

Gravel, Cyclocross

Wheel Size:

28" / 27.5" (650B)

Size:

S, M, L, XL, XXL

Frame Material:

aluminium (7020-T6)

Technical Information:

Wheel Standard:

12 x 142 mm (standard)

Axle Type:

12 mm thru-axle

Seatpost (Ø):

31.6 mm

Seatpost Clamp(Ø):

34.9 mm

Headset:

ZS44/28.6 - ZS56/40 (top to bottom)

Steerer tube rec.:

1 1/8" - 1.5" tapered

Recommended Fork Axle to Crown:

395 mm

Recommended Fork Travel:

0 - 40 mm

Bottom Bracket Standard:

BSA

Shell Width:

68 mm

Brake Mount:

Flat Mount (140 mm)

Front Derailleur Mount:

high clamp (34.9 mm)

Cable Routing:

internal, mechanical / electrical

Bottle Cage Mounts:

3

Approved For:

Rotor Size (max.):

160 mm

Tyre Size (max.):

700c x 47 mm, 27.5 x 2.0"

Chainrings:

1x, 2x

Chainring Size (max.):

1x 48 teeth, 2x 34-50 teeth

Fork Axle to Crown Size (max.):

430 mm

Note from the manufacturer:

The frame is approved for use with forks with a maximum of 32 mm stanchion tube diameter.

Features:

• recommended fork travel 47 mm
• for 3 mm ZS headset height (sizes S - XL) or 13 mm ZS headset height (size XXL)
• unobtrusive mounts for fenders or mudguards
• possible to mount a pannier rack with adapter
• ample tyre clearance
• trapezoidal frame triangle with straight lines ideal for bikepacking bags
• two bottle cage holders in the frame triangle, one directly underneath on the down tube
• signature weld seams
• sophisticated internal cable routing, outlet at the bottom bracket protected from dirt and splash water
• made in Germany

Technology:

7020-T6 aluminium
Not all aluminium is the same! Nicolai only uses a 7020-T6 (AlZn4.5Mg1) alloy for frames. Compared to 6061-T6 aluminium, this grade offers much better strength. The tensile strength of 7020 compared to 6061 aluminium is about one-third higher. The elastic limit is about one-fifth higher. These characteristics, combined with high-quality welding, result in a bicycle frame that is far superior in terms of durability. Compared to carbon, aluminium is much tougher, so that hitting, falling or stone chipping does not damage the structure.

RADO
To make sure you hit every lane on the trail, Nicolai mounts a form-fitting, exchangeable drop-out on all frames for adjusting the toe and camber. Due to the distinctly milled right dropouts for adjusting the camber, the rear only needs to be slightly readjusted after installation, which eases the strain on the material. The respective camber height is milled into the RADO with numbers 0, 1, 2 or -1 and -2. After the toe and camber have been adjusted, the RADO is fixed with a pin at the factory. This means that the original setting can be easily reproduced when replacing it. This is the only way the manufacturer can guarantee that Nicolai products operate precisely on tracks.

Geometry:

(based on a fork axle to crown length of 395 mm)
S:

Recommended Height:

160 - 168 cm (with MTB handlebars), 166 - 176 cm (with racing handlebars)

Stack:

559 mm

Reach:

380 mm

Seat Tube Length:

490 mm

Effective Top Tube Length:

545 mm

Head Tube Length:

130 mm

Chainstay Length:

430 mm

Wheelbase:

1019 mm

BB Drop:

75 mm

Seat Tube Angle:

74°

Head Tube Angle:

70.5°

Standover Height:

733 mm

M:

Recommended Height:

166 - 176 cm (with MTB handlebars), 174 - 184 cm (with racing handlebars)

Stack:

575 mm

Reach:

390 mm

Seat Tube Length:

510 mm

Effective Top Tube Length:

560 mm

Head Tube Length:

150 mm

Chainstay Length:

430 mm

Wheelbase:

1036 mm

BB Drop:

72.5 mm

Seat Tube Angle:

73.5°

Head Tube Angle:

71°

Standover Height:

754 mm

L:

Recommended Height:

174 - 184 cm (with MTB handlebars), 182 - 192 cm (with racing handlebars)

Stack:

596 mm

Reach:

403 mm

Seat Tube Length:

170 mm

Effective Top Tube Length:

580 mm

Head Tube Length:

170 mm

Chainstay Length:

430 mm

Wheelbase:

1052 mm

BB Drop:

72.5 mm

Seat Tube Angle:

73.5°

Head Tube Angle:

71°

Standover Height:

772 mm

XL:

Recommended Height:

182 - 192 cm (with MTB handlebars), 190 - 202 cm (with racing handlebars)

Stack:

606 mm

Reach:

410 mm

Seat Tube Length:

550 mm

Effective Top Tube Length:

595 mm

Head Tube Length:

180 mm

Chainstay Length:

430 mm

Wheelbase:

1062 mm

BB Drop:

72.5 mm

Seat Tube Angle:

73°

Head Tube Angle:

71.5°

Standover Height:

793 mm

XXL:

Recommended Height:

190 - 202 cm (with MTB handlebars), 200 - 208 cm (with racing handlebars)

Stack:

625 mm

Reach:

424 mm

Seat Tube Length:

570 mm

Effective Top Tube Length:

615 mm

Head Tube Length:

190 mm

Chainstay Length:

430 mm

Wheelbase:

1082 mm

BB Drop:

72.5 mm

Seat Tube Angle:

73°

Head Tube Angle:

71.5°

Standover Height:

424 mm

Models:

Custom Colours:
This product is a custom frameset, the sales prices are base prices. For individual advice on the selection options of colour, frame size and details, tailor made variants as well as further questions about Nicolai please contact our service department.
Since every Nicolai frame is made to your specifications, it is included in the Nicolai production plan. Depending on colour, special customisations and model, production time can range anywhere from 2 to 12 weeks. You will receive more detailed information about your desired model on customisation request from our customer service team.

factory raw:
The " factory raw" option gives you a frame in the desired size in an uncoated aluminium finish.

Contents:

• 1 x Nicolai Argon GX frame
• 1 x Nicolai thru-axle
• 1 x Nicolai spare derailleur hanger
• 1 x protective hose for internal cable routing
• 4 x zip ties
• 4 x bolts
• 5 x hose guides
• 1 x cable clips
• 2 x cable guide clips
• 1 x rubber plug
• 1 x rubber guide
• 1 x polishing fleece (only factory raw)