OneUp Components 150 mm Dropper Post V2 w/ Clamp Remote Lever

OneUp Components Dropper Post V2 150 mm Seatpost - Includes remote lever clamp

With the OneUp Components Dropper Post V2, OneUp presents the completely revised version of its previous post, Dropper Post 2.0, so to speak. The travel - a maximum of 150 mm in this case - can be reduced by 10 mm or by 20 mm. OneUp Components has worked flat out to save as many millimetres as possible on the dropper post to achieve the lowest stack height and shortest overall length ever. With this post you can adjust your saddle as low as never before. The Dropper Post has a reliable sealed cartridge, is controlled by a cable and comes with metal pins to adjust the travel to your needs. Unlike previous versions, you can even install them in Santa Cruz bikes with Lower Link VPP linkages.

Also included in this delivery is the OneUp Components Dropper Post V2 handlebar remote version clamp. Unlike its predecessor, it is made of aluminium, has an oversized bearing and guarantees super smooth operation. Its special lever position allows you to always have a secure grip on the handlebars when operating your dropper post. This way you do not have think twice when deciding if you're going to lower your Dropper Post, even if you are in technical terrain. This is because the position of OneUp's remote lever is reminiscent of the lever for shifting up, which is unlike most other remotes. This position naturally requires a much smaller thumb movement.
The cable of the Dropper Post handlebar lever is quickly and easy to adjust. The cable is clamped at the lever, so that the shortening of the cable housings for clean cable routing does not cause any problems. Unlike a hydraulic dropper post, the OneUp post is not temperature sensitive and if your remote is damaged, you can still use it. Simply take it out of the frame and operate the adjuster manually.

Specifications:

Application: All Mountain, Enduro
Travel: 150 mm
Diameter: 30.9 mm, 31.6 mm, 34.9 mm
Length: 405 mm
Setback: 0 mm

Technical Information:

Actuation: mechanical handlebar remote
Remote Mount: clamp (split)
Cable Routing: internal
Clamp: 2-bolt
Compatible Saddle Rails: 7 x 7 mm (standard), 7 x 9 mm (oval)
Material: aluminium

Approved For:

Weight Limit: 125 kg
Insertion Depth (max.): 222 mm (237 mm with actuator)
Insertion Depth (min.): 90 mm

Features:

- tons of travel (max. 150 mm) with a 183 mm stack height and a 405 mm effective length (without actuator = 15 mm)
- 315 mm maximum extension length
- travel can be adjusted by 10 or 20 mm by using metal pins that are placed in guide track (3 for 10 mm, 2x3 for 20 mm)
- cable actuated for easy installation
- reliable, sealed cartridge
- cartridge can be replaced by user
- easy to maintain at home
- compared to previous model, has a lower total length and stack, also less weight
- new DU bushing
- increased bushing overlap for increased durability
- Actuator V2.1 compatible with Santa Cruz Lower Link VPP
- version 2.0 of the remote lever is made of aluminium instead of carbon
- remote can also be used with other mechanical actuated dropper posts

Models:

30.9 mm / 405 mm / SB 0 mm:
Diameter: 30.9 mm
Length: 405 mm
Setback: 0 mm
Manufacturer Number: 1C0618 + 1C0577

31.6 mm / 405 mm / SB 0 mm:
Diameter: 31.6 mm
Length: 405 mm
Setback: 0 mm
Manufacturer Number: 1C0619 + 1C0577

34.9 mm / 405 mm / SB 0 mm:
Diameter: 34.9 mm
Length: 405 mm
Setback: 0 mm
Manufacturer Number: 1C0660 + 1C0577

Contents:

- 1 x OneUp Components Dropper Post V2, 150 mm
- 6 x 10 mm metal pins
- 1 x OneUp Components Dropper Post V2 handlebar remote
- 1 x cable with cable housings
- 1 x grease for tubes and seals