OneUp Components Oval Switch Chainring

OneUp Components Oval Switch Chainring - change your ring in 60 seconds

The OneUp Components oval Switch chainring is part of the Switch Direct Mount chainring system, which speeds up and greatly simplifies chainring changes. To complete the assembly in the shortest possible time, you only need a 4 mm hex key and do not even have to remove the crank. So before you tackle a steep trail, you can switch to a smaller chainring - faster than your friend can put on their cycling shoes! Due to their oval design, the Switch chainrings stand for traction, traction and again traction and are therefore especially suitable for uphill riding. They generate a constant torque at the rear wheel, which therefore doesn't skid out as easily. On the side, the Switch System also saves you money, because a OneUp Components Switch replacement chainring costs less than a new Direct Mount chainring.

Note: These chainrings are only compatible with the OneUp Components Switch carrier spider.

Specifications:

Application: Enduro, All Mountain, Trail
Mount: OneUp Components Switch
Teeth: 28 t, 30 t, 32 t, 34 t, 36 t
Gearing: 1x9-speed, 1x10-speed, 1x11-speed, 1x12-speed
Type: 12 % oval

Technical Information:

Material: aluminium (7075-T6)

Compatibility:

- SRAM 9-/10-/11-/12-speed chains
- not compatible with Shimano 12-speed chains

Features:

- chainring swap in under a minute (manufacturer specification)
- quick setup adjustments depending on the circumstances
- less cost for spare chainrings
-oval design: ultimate traction due to the harmonic torque on the rear wheel, optimal power transfer
- 115° timing
- narrow-wide structure ensures the chain won't drop
- requires only a 4 mm hex key, cranks don't need to be removed

Note: Loosen bolts with two turns, loosen and remove chainring with a 20° rotation. To fit the new Switch chainring, proceed in the opposite direction (the small bulge on the inner edge must be in line with the crankarm), 8 Nm tightening torque.

Manufacturer Part Numbers:

28 tooth: 1C0386BLK
30 tooth: 1C0387BLK
32 tooth: 1C0388BLK
34 tooth: 1C0389BLK
36 tooth: 1C0390BLK

Contents:

- 1 x OneUp Components Switch oval chainring