Praxis Works M30 MTB BB30 / PF30 Bottom Bracket - black/Pressfit

Praxis Works M30 MTB BB30 / PF30 Bottom Bracket

Item number: 70017

Only for mountain bikes: the M30 MTB BB30 / PF30 bottom bracket


The Praxis Works M30 BB30/PF30 MTB bottom bracket enables you to install a Praxis Works crank with M30 axle on 73 mm BB30 and PF30 MTB frames. M30 technology combines a 30 mm bearing (drive side) with a 28 mm bearing (non-drive side), which further benefits both fit and power transmission. BB30 frames have a shell diameter of 42 mm, and the shells of Pressfit 30 frames measure 46 mm in diameter.

Specifications:

Application:
Cross Country
Series:
M30
Type:
BB30, Pressfit PF30
Shell Diameter:
42 mm, 46 mm
Shell Width:
73 mm
Axle Diameter:
30 mm (Practice Works M30)

Technical Information:

Bearings:
steel
Bottom Bracket Cup Material:
aluminium

Compatibility:

  • for 73 mm BB30 or PF30 MTB frames
  • only compatible with Praxis Works w/ M30 axle, not for other cranks
  • for braze-on, clamp and direct mount front derailleurs

Features:

  • 30 mm bearing on the drive side, 28 mm bearing on the non-drive side
  • cups made of forged and machined heat-treated aluminium
  • patented sleeve design: bearing cup with integrated sleeve on the non-drive side for a smooth fit
  • O-ring on non-drive side compensates for frame discrepancies
  • orange elastomer ring for drive side

Technology:

M30
Praxis Works M30 bottom brackets are only suitable for use with Praxis Works M30 cranks. The M30 axle corresponds to a kind of " oversize GXP" . It is 30 mm thick and reduced to 28 mm on the left end to fit the non-drive side bearings. A shaft washer is used at the drive side to provide preload and a 30 mm bearing, which is opposed by a 28 mm bearing at the non-drive side. M30 combines the advantages of wide bearings with the benefits of a sturdy 30 mm axle. This enables a secure fit and better power transmission.

Practice Collet
Patented Praxis Works technology not only neutralizes all tolerances from frame manufacturers, but also guarantees an increased service life. In Praxis Collet bottom brackets, the non-drive side is pressed in and then the drive side is screwed into it. When screwed together, the bearing expands to a defined end position, which corresponds to the respective press fit, and sits tight without creaking. Additionally, an orange elastomer rubber ring is compressed in the drive direction, which in turn expands towards the frame, thereby jamming the bearing once again. The elastomer material compensates for tolerances while simultaneously muffling any cracking noises.

Manufacturer Number:

73-4001R

Contents:

  • 1 x Praxis Works M30 BB30 left bearing cup, incl. bearings and bottom bracket sleeve
  • 1 x Praxis Works M30 BB30 right bearing cup, incl. bearings
  • 1 x rubber rind for drive side, orange
  • 1 x compression sleeve for drive side
  • 1 x 30 mm x 1 mm dust cap for drive side
  • 1 x 30 mm x 2 mm dust cap for drive side
  • 1 x wave washer for drive side
  • 1 x 28 mm x 2 mm dust cap for non-drive side
  • 1 x Praxis Works PF30 bottom bracket sleeve
  • 1 x O-ring for non-drive side

Order Together:

  • M30 tool


  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.89 / 5.00

Models:

  • black/Pressfit, in stock
    58.85€

Rate this product

Be the first and leave your opinion!

Customer Reviews

no reviews yet
5
0
4
0
3
0
2
0
1
0

Your opinion counts!

Be the first and leave a comment!