- 100 day return period
- Online since 1998
- Trusted Shop 0 / 5.00
Application: Road, Cross Country
Upper Cup: 1"
Lower Cup: 1"
Pitch: 24 tpi
Steerer Tube: 1"
Design: external cup (EC)
Material: steel (CrMo), composite
Bearings: ball bearing
Upper Insert Depth: 8.5 mm
Lower Insert Depth: 8.5 mm
Upper Outer Diameter: 30 mm
Upper Inner Diameter: 25.4 mm
Lower Outer Diameter: 30 mm
Lower Inner Diameter: 26 mm
- Total Stack Height: 27 mm
- Cup diameter: upper 42 mm, lower 43 mm
Standardized Headset Identification System (S.H.I.S.):
The Standardized Headset Identification System (S.H.I.S.) creates a common language for describing modern bicycle headsets. The system provides comprehensive and scalable headset fitment information in a standardized format; making it easy to communicate headset requirements based on frame and fork interfaces. The system addresses the critical interface dimensions required to fit a fork to a frame, as well as bearing location/cup type. To determine fit, four dimensions are needed: (1) stem-clamp diameter of fork, (2) crown-race seat diameter of fork, (3) head-tube top inside diameter, and (4) head-tube bottom inside diameter. Bearing location and cup-type are identified as (a) external cup (EC), (b) semi-integrated or zero stack (ZS), or (c) integrated (IS).
EC: Bearings contained within cups that are located outside of the frame (external cup).
ZS: Bearings contained within pressed-in cups where the cup and bearings rest inside the frame (zero stack).
IS: Bearings that fit directly into a bonded or machined interface that is integrated into the frame (integrated).
Manufacturer Part Numbers:
- 1 x Ritchey Logic upper cup incl. bearings
- 1 x Ritchey Logic lower cup incl. bearings
- 1 x nut
- 1 x crown race