- 100 day return period
- Online since 1998
- Trusted Shop 4.87 / 5.00
The XTR Enduro BR-M9120 disc brake set by Shimano - optimum control
This Shimano XTR Enduro BR-M9120 disc brake set (front + rear) comes with synthetic resin pads with cooling fins. It has four ceramic pistons each at the front and rear, which provide additional brake power in aggressive Trail and Enduro use, as well as two aluminium brake lever, with which the reach and contact point can be adjusted without tools. Servo Wave technology ensures optimum conversion of the lever travel into deceleration power. The design of the BL-M9120 is also remarkable: The angled clamp is located more centrally than its predecessor, so that the reservoir is supported by the handlebar at the outer end. This results in more stiffness, a more direct braking sensation and more control. The two-piece Ice-Tech brake calipers can of course be easily bled using One Way Bleeding.
Series: XTR M9100
Application: Enduro, Trail
Type: hydraulic, 4 pistons
Actuation: mineral oil
Hose Length (Front/Rear): 1000 mm / 1700 mm
Technical Information - Caliper:
Caliper Mount: post mount
Pads: N03A resin with cooling fins (N04C metal optional)
Caliper Material: aluminium
Hose Connection: banjo
Technical Information - Lever:
Lever Length: 2-finger
Adjustment Options: reach adjust (no tools required), free stroke
Mount: clamp (split), I-Spec EV
Design: right (side-specific), left (side-specific)
Brake Lever Material: aluminium
Brake Lever Housing Material: aluminium
Hose Connection: straight
- higher braking force with less effort on the fingers and extremely linear reaction to the lever movement
- 10 % more braking power (compared to M9020)
- internal routing
- updated brake lever shape
- faster brake response with shorter idle travel
- greater flexibility and action-optimised cockpit layout
- 8 % stiffer than M9020 even at high temperatures
- IS mount with adapter possible
- ceramic piston
- recommended brake rotor: RT-MT900
- painted brake caliper, titanium bolt (4 mm)
- funnel bleeding
- I-Spec EV compatible
- anodised lever, painted body, stainless steel clamp bolt (painted)
When you pull a Servo Wave brake lever, initial pad travel is fast, so little lever movement is needed to bring the pads into contact with the rotor. The power multiplication factor then increases rapidly at the pad-to-rim contact so more of the lever stroke is used to apply greater braking power with improved control.
With the I-Spec EV construction, the Shimano shifter can be mounted directly on the brake lever, so that a clamp is not required and the adjustment range can be significantly increased. 14 mm are available with I-Spec EV for longitudinal adjustment and 60° for rotational adjustment, allowing each rider to make a setup to suit their individual anatomy or preferences. I-Spec EV shifters are not compatible with older I-Spec systems.
One-Way-Bleeding was developed for quick and easy prevention of air in Shimano's hydraulic system. They have streamlined the oil route throughout the system to prevent air bubbles from being captured in the system.
One way oil routing plus a funnel tool with mineral oil provides an easy and clean bleeding system.
Brake fading during prolonged uninterrupted operation, e.g. downhill, impairs braking performance. Shimano has introduced brake discs and pads with Ice-Tech technology to create a cooling technology for consistently high braking performance. The brake rotor has a three-layer stainless steel sandwich structure on the outside around an aluminium core. It radiates heat better and reduces a surface temperature from 400° C to 300° C, for example. The brake pads also have optional cooling fins. The design of the rotor in combination with the cooling fins results in a longer service life of the pads, less braking noise, less fading and a lower weight.
XTR, Saint, Deore XT, SLX, Zee, Deore LX calipers are bundled with Ice Technology pistons in order to achieve optimized lightweight, high rigidity and heat dissipation. Oversized pistons transfer hydraulic power directly to the brake pad, and ceramic material is used to avoid heat transfer for constant stable braking, providing efficient stopping power transfer without loss.
Manufacturer Part Number:
I-M9120KLFPSA100 + I-M9120KRRXSA170
- 2 x Shimano XTR BR-M9120 + BL-M9120 disc brakes, front and rear
- 1 x Shimano SM-BH90-SBM brake hose, 1000 mm (front)
- 1 x Shimano SM-BH90-SBM brake hose, 1700 mm (rear)
- 2 pair of Shimano N03A brake pads
- 2 x insert
- 2 x olives
- 4 x caliper bolts
- 1 x bleed block (front)
- 1 x Shimano TL-BH61 tool, 2-piece (front)
- not incl. rotor
- not incl. adapter
- mount ready (filled & bled)