Zipp 808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset

Item number: 59409
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
808 NSW Carbon Clincher Tubeless Disc Centre Lock Wheelset - matte black-gloss black/28" set (front 9x100 + rear 10x135)
  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.91 / 5.00

For disc brakes and compatible with tubeless: the 808 NSW Carbon Clincher Tubeless Disc wheelse by Zipp


Zipp has equipped its NSW wheel range with a revised rim shape and the advantages of disc brakes and tubeless compatibility. The NSW series consists of the fastest, strongest and highest-performance wheels Zipp has ever designed. That is why the latest technological innovations such as the disc brake are a particularly good match for the NSW.
But the optimised rim shape is not only disc-compatible, it is also very efficient aerodynamically and extremely wind resistant. In addition, Zipp engineers have revised the rim-tyre section and tuned the NSW Carbon Clincher Disc wheels to 28 mm wide tyres to meet the rolling resistance, aerodynamic efficiency and comfort requirements of modern riders.

Specifications:


Application: Triathlon & Time Trial, Road
Wheel Size: 28"
Tyre Type: clincher tyre
Number of Spokes: 24
Brake Type: Center Lock Disc
Tubeless System: Tubeless Ready

Technical Information - Rim:


Type: Zipp NSW Disc (Nest Speed Weaponry)
Dimensions (ETRTO): 19-622
Inner Width: 19 mm
Outer Width: 26.4 mm
Depth: 82 mm
Valve Hole Diameter: SV/Presta (6.5 mm)
Rim Material: Carbon

Technical Information - Front Hub:


Type: Zipp Cognition™ Disc
Over Locknut Dimension: 9 x 100 mm quick release, convertible to 12 x 100 mm thru-axle and 15 x 100 mm thru-axle
Bearings: Swiss ABEC 5 stainless steel
Body Material: aluminium

Technical Information - Rear Hub:


Type: Zipp Cognition Disc
Over Locknut Dimension: 10 x 135 mm quick release, can be converted to 12 x 142 mm thru-axle
Bearings: Swiss ABEC 5 stainless steel
Body Material: aluminium
Freehub Body Material: aluminium
Freehub Body: Axial Clutch™

Technical Information - Lacing:


Front Lacing Pattern: 2-cross
Rear Lacing Pattern: 2-cross
Spoke Type: Sapim CX-Ray / J-bend / bladed
Spoke Size: 230 mm (front), 226 mm/230 mm (rear l/r)
Spoke Material: stainless steel
Nipple Type: Sapim secure-lock / external

Approved For:


Weight Limit: 113 kg total weight
Air Pressure (max.): 8.6 bar
Tyre Width (max.): 28 - 62 mm (according to ETRTO)

Features:


- ABLC SawTooth™ profile on the entire rim surface
- easy to maintain thanks to Centre Lock and J-Bend spokes
- tubeless set-up possible (lower tyre pressure, better cornering performance, higher puncture resistance)

Technology:


NSW
NSW stands for " Nest Speed Weaponry" . 'The Nest' is the nickname the Zipp engineers have given to the windowless high-security research laboratory in a corner of the Zipp factory. This site, or the ground-breaking ideas and designs that emerged from it, became the namesake for an entire series of wheels. The Zipp NSW series is a science, philosophy and mission to develop the fastest, most stable and highest performing wheel components of all times.

ImPress™
The Impress graphics not only provide valuable weight savings, but also enable unique and permanent application of the four letters most feared by the competition in bicycle racing: Z-I-P-P.

ABLC™ SawTooth™
The SawTooth design has 12 nodes, which are connected in such a way that an aerodynamic suction starts at 50 Hz and a speed of 20 mph. SawTooth creates small turbulences of low strength but high frequency, which reduce the flat bubble effect on the aerodynamically shielded side of the rim profile, which also reduces wind susceptibility and increases crosswind stability.

Models:


28" set (front 9x100 + rear 10x135) Shimano:
Freehub: Shimano Road
Gearing: 8-/9-/10-/11-speed
Note: Assembly of 8-/9-/10-speed cassettes on Shimano Road freehub bodies requires a 1.85 mm spacer.
Manufacturer Number: 00.1918.377.000 + 00.1918.378.000

28" set (front 9x100 + rear 10x135) Campy:
Freehub: Campagnolo
Gearing: 9-/10-/11-/12-speed
Manufacturer Number: 00.1918.377.000 + 00.1918.378.001

28" set (front 9x100 + rear 10x135) SRAM XDR:
Freehub: SRAM XDR
Gearing: 11-/12-speed
Note: A 1.8 mm spacer is required to mount XD cassettes on an XDR freehub.
Manufacturer Number: 00.1918.377.000 + 00.1918.378.002

Only available to European & Russian customers.

Contents:


- 1 x Zipp 808 NSW Carbon Clincher Tubeless Disc wheelset (front and rear)
- 2 x Zipp wheel bags
- 2 x Zipp Tangente quick releases
- 1 x Zipp 15 mm front conversion kit
- 1 x Zipp 12 mm front conversion kit
- 1 x Zipp rear 12 x 142 mm conversion kit
- 2 x Zipp tubeless valves, pre-installed
- 2 x Zipp tubeless rim tape, pre-installed
- 1 x Zipp Cognition maintenance oil (for rear hub)
- 2 x Zipp valve tool
- 1 x 1.85 mm cassette spacer (only for Shimano version)


Gewicht:

  • matte black-gloss black/28" set (front 9x100 + rear 10x135): 1860 g (Satz)

Models:

  • matte black-gloss black/28" set (front 9x100 + rear 10x135), in stock
    2,520.17€

Rate this product

Be the first and leave your opinion!

Customer Reviews

no reviews yet
5
0
4
0
3
0
2
0
1
0

Your opinion counts!

Be the first and leave a comment!