Cannondale Cannondale Moterra SL 1 Carbon 29"/27.5" E-MTB
Guidelines for Replacing E-bike Components:
Before you replace components on your e-bike, please note the guideline for replacing components on CE-marked e-bikes/pedelecs with pedal assistance.Information regarding the return of batteries and electrical equipment:
You can find information on the return and disposal of used batteries, accumulators, and electrical appliances here. For information regarding the return of used e-bike batteries, please contact our customer service.Specifications:
- Application:
- Enduro, All Mountain
- Wheel Size:
- Scaled Sizing
- Front Travel:
- 160 mm
- Rear Travel:
- 150 mm
- Sizes:
- S, M, L, XL
- Front Triangle Material:
- carbon
- Rear Triangle Material:
- carbon
E-Motor:
- Type:
- mid-drive motor
- Motor Type:
- Shimano EP801
- Pedal Assist (max.):
- 25 km/h
- Power:
- 600 W
- Battery Type:
- Custom
- Capacity:
- 600 Wh
- Display:
- Shimano SC-EM800
Components:
- Frame:
- Cannondale Moterra SL Series 1 carbon main frame, Proportional Response Tuned, Flex Pivot, internal cable routing, 12 x 148 mm (Boost), Maxle thru-axle
- Fork:
- Fox Racing Shox 36 Float GRIP2 Factory, 15 x 110 mm (Boost), 44 mm Offset, Kashima coating, Kabolt thru-axle
- Stem:
- Cannondale 1, Aluminum (7075), 0°, 35 mm clamp
- Handlebars:
- HollowGram SAVE Riser, carbon, 30 mm Rise, 8° Backsweep, 5° Upsweep 35 mm clamp, 780 mm
- Grips:
- Cannondale TaperRidge
- Rear Shock:
- Fox Racing Shox Float X EVOL LV Factory, 2-Position Adjust, 210 x 55 mm
- Remote System:
- none
- Headset:
- Acros Adjustable Angle 1.2°, semi-integrated, ZS56/28.6 (top) - ZS56/40 (bottom)
- Seatpost:
- Cannondale DownLow Dropper, internal routing, 31.6 mm, Travel: 150 mm (S), 170 mm (M, L, XL)
- Saddle:
- Fizik Terra Ridon X3, 145 mm, Wingflex, K:ium-Mobius rails
- Crank:
- e*thirteen e*spec Race carbon, 55 mm chainline, 165.0 mm, 34 teeth
- Pedals:
- none
- Brakes:
- Magura MT7, hydraulic disc brake, 4-piston, Magura Storm HC rotors, 203 mm, 6-bolt
- Shift Lever:
- SRAM AXS T-Type Pod, 12-speed
- Rear Derailleur:
- SRAM X0 Eagle Transmission AXS T-Type
- Cassette:
- SRAM X0 Eagle T-Type, 10-52 teeth, 12-speed
- Chain:
- SRAM X0 Eagle Transmission T-Type, Flattop
- Rims:
- DT Swiss XM 1700 Spline, 30 mm inner width, TC Tubeless Ready
- Spokes:
- DT Swiss Competition, Straight Pull
- Front Hub:
- DT Swiss 350, 15 x 110 mm
- Rear Hub:
- DT Swiss 350, Ratchet System 36 SL 12 x 148 mm
- Front Tyre:
- Maxxis DHF 3C EXO+, 29 x 2.5" , Tubeless Ready
- Rear Tyre:
- Maxxis Dissector 3C EXO+, 27.5 x 2.4" , Tubeless Ready
Approved For:
- Weight Limit:
- 138 kg (Rider + Luggage)
- Tyre Size (max.):
- 29 x 2.4" (FR), 27.5" x 2.4" (RR)
- Fork Axle to Crown Size (max.):
- 571 mm
Features:
- Weight-optimized and agile e-trail bike made of carbon with full suspension from Fox Racing Shox and electronic SRAM X0 Eagle Transmission 12-speed gears
- Mullet construction with 29-inch front wheel and 27.5-inch rear wheel, thus smooth-running but more manoeuvrable than pure 29-inch bikes
- Proportional Response Geometry concept: Chainstay lengths, frame design, and damping behavior are tailored to frame size
- Powerful Magura MT7 4-piston disc brake
- DT Swiss XM 1700 Spline wheelset with Maxxis tires
- Powerful Shimano EP801 motor with 85 Nm torque and 4 specifically tuned riding modes
- Frame-integrated battery with 600 Wh capacity
- Conversion to 29-inch rear wheel for more control while maintaining geometry possible thanks to Flip-Chips
- Adjustable headset cups to change the steering angle by 1.2°
- Integrated bash guard to protect the motor
- 55 mm chainline
- SRAM UDH universal derailleur hanger
Geometry:
S:- Recommended Height:
- 154 cm - 165 cm
- Stack:
- 630 mm
- Reach:
- 420 mm
- Seat Tube Length:
- 380 mm
- Top Tube Length:
- 537 mm
- Effective Top Tube Length:
- 565 mm
- Head Tube Length:
- 115 mm
- Chainstay Length:
- 449 mm
- Wheelbase:
- 1219 mm
- Bottom Bracket Height:
- 335 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77°
- Head Tube Angle:
- 62.5°
- Standover Height:
- 738 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 165.0 mm
M:
- Recommended Height:
- 162 cm - 175 cm
- Stack:
- 639 mm
- Reach:
- 445 mm
- Seat Tube Length:
- 400 mm
- Top Tube Length:
- 559 mm
- Effective Top Tube Length:
- 592 mm
- Head Tube Length:
- 125 mm
- Chainstay Length:
- 449 mm
- Wheelbase:
- 1248 mm
- Bottom Bracket Height:
- 335 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77°
- Head Tube Angle:
- 62.5°
- Standover Height:
- 737 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 165.0 mm
L:
- Recommended Height:
- 172 cm - 185 cm
- Stack:
- 648 mm
- Reach:
- 470 mm
- Seat Tube Length:
- 445 mm
- Top Tube Length:
- 584 mm
- Effective Top Tube Length:
- 619 mm
- Head Tube Length:
- 135 mm
- Chainstay Length:
- 453 mm
- Wheelbase:
- 1283 mm
- Bottom Bracket Height:
- 335 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77°
- Head Tube Angle:
- 62.5°
- Standover Height:
- 737 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 165.0 mm
XL:
- Recommended Height:
- 182 cm - 195 cm
- Stack:
- 657 mm
- Reach:
- 505 mm
- Seat Tube Length:
- 490 mm
- Top Tube Length:
- 656 mm
- Effective Top Tube Length:
- 621 mm
- Head Tube Length:
- 145 mm
- Chainstay Length:
- 458 mm
- Wheelbase:
- 1327 mm
- Bottom Bracket Height:
- 335 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77°
- Head Tube Angle:
- 62.5°
- Standover Height:
- 742 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 165.0 mm
Manufacturer Number:
C65104UShipping Notice:
The shipment is sent pre-assembled by a forwarding agent. The delivery time is, depending on the workshop workload, 2 - 5 days in addition to the delivery time shown in the online shop. For individual consultation, please contact our customer service team.Contents:
- 1 x E-Mountainbike Cannondale Moterra SL 1 carbon 29" / 27.5"
- 1 x Charger Cannondale Custom 4 A
- 100 day return period
- Online since 1998