Cannondale Jekyll 1 Carbon 29" Mountain Bike
The Jekyll 1 Carbon 29" Mountain Bike by Cannondale with SRAM components and technical highlights
The Cannondale Jekyll 1 29" mountain bike made of carbon is a downhill-oriented enduro full-suspension bike with SRAM drivetrain and Fox suspension elements, which comes up with some technical refinements. The Gravity Cavity, which hides the shock in the down tube for a low centre of gravity, and the Guidler above the chainring, a combination of idler pulley and chain guide, are particularly eye-catching. This prevents chain drop and pedal kickback during compression, which results from the higher main pivot point. The main pivot point is not near the bottom bracket as usual, but clearly above it. This results in a backward axle travel, which in turn causes the rear triangle to glide very smoothly and fluidly over obstacles without slowing you down. Thanks to Proportional Response, the frame design is individually adapted to each frame size, from geometry to chainstay length to linkage design. However, that's not all: the rear triangle with Ai Offset offers great tyre clearance with rather short chainstays and a stiff rear wheel thanks to even spoking. The result is a bike with outstanding efficiency, strong grip, high smoothness and agility, which makes you want to go downhill again.
Specifications:
- Application:
- Enduro, All Mountain
- Wheel Size:
- 29"
- Front Travel:
- 170 mm
- Rear Travel:
- 165 mm
- Sizes:
- S, M, L, XL
- Front Triangle Material:
- Carbon
- Rear Triangle Material:
- Carbon
Components:
- Frame:
- Cannondale Jekyll, Carbon, Proportional Response Tuned, Ai Offset
- Fork:
- Fox Racing Shox Float Factory 38, 15 x 110 mm (Boost), 44 mm offset
- Stem:
- FSA Grid 35, 35 mm
- Handlebars:
- Cannondale 1 Riser, carbon, 30 mm rise, 8° backsweep, 5° upsweep, 780 mm
- Grips:
- fabric FunGuy
- Rear Shock:
- Fox Racing Shox Float Factory X2, High-/low speed compression, High-/Low-Speed Rebound
- Remote System:
- none
- Headset:
- Integrated Sealed Bearing, Tapered
- Seatpost:
- Cannondale DownLow Dropper with Matchmaker, 31.6 mm, stroke: 125 mm (S), 150 mm (M), 170 mm (L, XL)
- Saddle:
- fabric Scoop Shallow Elite, hollow steel rails (CrMo)
- Crank:
- SRAM X1 Eagle B148, 30-tooth, 55 mm chainline
- Pedals:
- none
- Brakes:
- SRAM Code RSC hydraulic, Centerline brake rotors, 220 mm (front) / 200 mm (rear)
- Shift Lever:
- SRAM GX Eagle, 12-speed
- Rear Derailleur:
- SRAM GX Eagle, 12-speed
- Cassette:
- SRAM GX Eagle XG-1275, 10-52 teeth, 12-speed
- Chain:
- SRAM NX Eagle, 12-speed
- Rims:
- WTB KOM Trail i30 TCS, 32 holes, tubeless ready
- Spokes:
- DT Swiss Factory J-Bend
- Front Hub:
- Formula, 15 x 110 mm
- Rear Hub:
- SRAM MTH 700, 12 x 148 mm, SRAM XD freehub
- Front Tyre:
- Maxxis Assegai, 29 x 2.5" , 3C, EXO+, tubeless ready
- Rear Tyre:
- Maxxis Minion DHR II, 29 x 2.4" , EXO+, tubeless ready
Approved For:
- Weight Limit:
- 138 kg (rider + gear)
- Rotor Size (max.):
- 220 mm (front), 203 mm (rear)
- Tyre Size (max.):
- 29 x 2.5"
- Chainrings:
- 1x
- Fork Axle to Crown Size (max.):
- 581 mm
Features:
- Proportional Response geometry concept: chainstay lengths, frame design and damping behaviour are matched to frame size
- Gravity Cavity: shock position in down tube for low centre of gravity, with down tube protection
- 4-bar linkage design for ideal anti-rise and anti-squat behaviour, thus high braking traction, drive efficiency and high grip
- with Guidler: combination of idler pulley and chain guide prevents pedal kickback on uneven terrain
- high main pivot point for rearward axle travel, allowing higher speed and greater tyre clearance
- 55 mm chainline
Technology:
Ai OffsetAsymmetric integration (Ai) places the drivetrain 6 mm further out than original drivetrains with 142 mm rear wheel over locknut dimension and 3 mm further out than standard 148 mm configurations. This is achieved through an asymmetrical rear triangle. This results in increased tyre clearance, not only but also when using a front derailleur. This in turn allows for shorter chainstays, which brings high traction and nimble handling. Furthermore, there are advantages in the rear wheel construction: the spokes on the left and right have the same length, tension and angle, so you benefit from a wheel that is up to 60% stiffer without having to compromise. To implement the offset, the chainring is also set further the outside.
Geometry:
S:- Recommended Height:
- 157 cm - 165 cm
- Stack:
- 625 mm
- Reach:
- 425 mm
- Seat Tube Length:
- 390 mm
- Top Tube Length:
- 569 mm
- Effective Top Tube Length:
- 541 mm
- Head Tube Length:
- 100 mm
- Chainstay Length:
- 430 mm
- Wheelbase:
- 1193 mm
- Bottom Bracket Height:
- 348 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77.5°
- Head Tube Angle:
- 64°
- Standover Height:
- 750 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 165 mm
M:
- Recommended Height:
- 162 cm - 175 cm
- Stack:
- 634 mm
- Reach:
- 450 mm
- Seat Tube Length:
- 410 mm
- Top Tube Length:
- 608 mm
- Effective Top Tube Length:
- 569 mm
- Head Tube Length:
- 110 mm
- Chainstay Length:
- 435 mm
- Wheelbase:
- 1227 mm
- Bottom Bracket Height:
- 348 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77.5°
- Head Tube Angle:
- 64°
- Standover Height:
- 750 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 165 mm
L:
- Recommended Height:
- 172 cm - 182 cm
- Stack:
- 643 mm
- Reach:
- 475 mm
- Seat Tube Length:
- 445 mm
- Top Tube Length:
- 623 mm
- Effective Top Tube Length:
- 588 mm
- Head Tube Length:
- 120 mm
- Chainstay Length:
- 442 mm
- Wheelbase:
- 1264 mm
- Bottom Bracket Height:
- 348 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77.5°
- Head Tube Angle:
- 64°
- Standover Height:
- 760 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 170 mm
XL:
- Recommended Height:
- 180 cm - 195 cm
- Stack:
- 652 mm
- Reach:
- 510 mm
- Seat Tube Length:
- 500 mm
- Top Tube Length:
- 660 mm
- Effective Top Tube Length:
- 627 mm
- Head Tube Length:
- 130 mm
- Chainstay Length:
- 450 mm
- Wheelbase:
- 1311 mm
- Bottom Bracket Height:
- 348 mm
- BB Drop:
- 30 mm
- Seat Tube Angle:
- 77.5°
- Head Tube Angle:
- 64°
- Standover Height:
- 770 mm
- Stem Length:
- 35 mm
- Handlebar Width:
- 780 mm
- Crank Arm Length:
- 170 mm
Manufacturer Number:
C21202UShipping Notice:
The shipment is sent pre-assembled by a forwarding agent.The delivery time is extended by 2-5 days, depending on the overall volume of orders.
For individual consultation, please contact our customer service team.
Contents:
- 1 x Cannondale Jekyll 1 Carbon 29" Mountain Bike
- 100 day return period
- Online since 1998