Cyclus Tools Thread Cutters for Fork Tube incl. Handle - Closeout
Item number: 4191
The Cyclus Tools thread cutting tool allows you to re-cut the thread of the fork tube.
Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread.
Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork.
Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool.
Before you start with the thread cutting process, you should first clean the fork tube. Then place the cutting blade (guide) at right angles to the steerer tube on the thread of the fork. Make sure that you turn the tool exactly onto the existing thread and do not tilt it. This prevents damage to the existing thread.
Please note that the fork thread cutting tool is only used for re-tapping an existing thread on the fork.
Features:
- suitable for recutting the thread on the fork tube
- with matching die
- optionally as 1" or 1 1/8"
Manufacturer Numbers:
- 1":
- 720001 sold-out
- 1 1/8":
- 720002
Note: Use an oil suitable for the material for the cutting process. It is also recommended that the tool be cleaned and oiled on a regular basis, which will increase the service life of the tool.
Contents:
- 1 x Cyclus Tools cutter
- 1 x Cyclus Tools threading die
Related Products
Cyclus Tools External Threading Die for Steerer Tube
77.89€
Cyclus Tools Fork Cutting Tool for Threading Dies
34.61€
Cyclus Tools Standard Thread Cutters for Bottom Bracket Housing with Holder
103.86€
- 100 day return period
- Online since 1998
- Trusted Shop 4.87 / 5.00
