Enduro Bearings Angular Contact Ball Bearing 7902 15 mm x 28 mm x 7 mm

Maximum number of balls in the angular contact ball bearing: the 7902 MAX from Enduro Bearings

MAX bearings are characterised by a 35 to 40 % higher load capacity than standard radial bearings. For 20 years Enduro Bearings has been manufacturing them specifically for use on mountain bike shocks. As its name indicates, MAX bearings are fitted with the maximum possible number of balls.
In standard radial bearings, only 3 or 4 balls make contact during the load at any given time. Inside of Enduro Bearings' Angular Contact (A/C) bearings, ALL balls are engaged so that they can distribute force over a larger surface area. This reduces friction and minimizes wear.

Choose between a version with a 2RS seal (type 1) or a version with a Z seal (type 3).

Specifications:

Dimensions (Inner x Outer x Width):

15 mm x 28 mm x 7 mm

Designation:

7902

Models:

Type 1:

Design:

Angular contact ball bearing

Tolerance:

ABEC 3 / ABEC 1

Recommended Use:

Suspension pivots, shocks

Inner Race Material:

steel (52100)

Outer Race Material:

steel (52100)

Ball Material:

steel

Seals:

2RS

Basic static load rating:

3.1 kN (696 lbs)

Manufacturer Number:

79022RSMAX

Type 2: sold-out

Design:

Angular contact ball bearing

Tolerance:

ABEC 3 / ABEC 1

Recommended Use:

Suspension pivots, shocks

Inner Race Material:

steel (52100)

Outer Race Material:

steel (52100)

Ball Material:

steel

Seals:

1ZS

Basic static load rating:

3.1 kN (696 lbs)

Manufacturer Number:

79021ZSMAX

Type 3:

Design:

Angular contact ball bearing

Tolerance:

ABEC 3 / ABEC 1

Recommended Use:

Suspension pivots, shocks

Inner Race Material:

steel (52100)

Outer Race Material:

steel (52100)

Ball Material:

steel

Seals:

t

Basic static load rating:

3.1 kN (696 lbs)

Manufacturer Number:

7902ZMAX

Features:

• Angular contact ball bearing with 15° angle
• MAX = maximum number of balls, without cage or partitions
• 35 % higher load carrying capacity than standard bearings, turn less easily
• race grooves made of carbon-chrome steel alloy, heat and triple cold treated (down to -190° C), minimum hardness Rockwell HRC 62, polished
• chrome steel balls 10th degree = circularity is 10/1,000,000"
• Level 1 rating from the Annular Bearing Engineer's Committee (ABEC) in terms of noise, manufacturing tolerances correspond to level 3
• 2RS: 2 rubber seals, one on each side
• Z: simple metal seal
• 90% filled with waterproof high-pressure grease

Contents:

• 1 x Enduro Bearings 7902 15 mm x 28 mm x 7 mm ball bearing