Gates CDN S150 Crankset
Item number: 83784
The Gates S150 crankset has a matt finish throughout and comes with a pre-mounted CDN belt drive sprocket. This saves time when setting up the belt drive for your city bike.
The main advantages of the Gates Carbon Drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or leisure riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past.
Clean: No lubricant means no accumulation of grease and dirt.
Smooth and silent operation: no metal-to-metal contact of the chains.
Light: The whole system weighs less than a standard bicycle chain.
No elongation: Belt does not need to be re-tensioned or replaced.
Self-cleaning: CenterTrack and MudPort profiles are specially designed to repel mud, dirt, snow or other contaminants.
Consistent efficiency: The drive boasts a long service life compared to that of a conventional chain, where efficiency is significantly reduced by wear or dirt.
Installing a Gates Carbon Drive Belt Drive requires a specially-made frame, therefore we strongly advise against using one to modify a conventional framework.
Specifications:
- Application:
- City
- Belt sprocket attachment:
- 130 mm bolt circle diameter, 5-arm
Technical Information:
- Series:
- CDN
- Crank Arm Material:
- aluminium
- Belt drive sprocket material:
- composite
- Gradation:
- 46 tooth, 50 tooth, 55 tooth
- Crank Arm Length:
- 170.0 mm, 175.0 mm
- Belt line:
- depends on the gear hub
- Compatible BSA Shell Width:
- 68 mm
- Recommended Bottom Bracket:
- 4-sided JIS (e.g. Shimano BB-UN300, Thun Zumba)
- Belt (rec.):
- CDN belt (tooth pitch 11 mm)
Note from the manufacturer:
The CDN system is not approved for mountain bikes, e-bikes with a mid-drive motor or gearbox, bikes without gears, or touring bikes.Features:
- CDN level: cost-effective CenterTrack variant
- suited for city and asphalt roads
- middle guide groove (CenterTrack)
- crank with mounted CDN pulley: time saving during set-up
- generates the required belt line
- concentric mounting minimises fluctuations in belt tension
- matt black anodised crank arms
Technology:
Gates Carbon Drive SystemThe main advantages of the Gates Carbon Drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or leisure riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past.
Clean: No lubricant means no accumulation of grease and dirt.
Smooth and silent operation: no metal-to-metal contact of the chains.
Light: The whole system weighs less than a standard bicycle chain.
No elongation: Belt does not need to be re-tensioned or replaced.
Self-cleaning: CenterTrack and MudPort profiles are specially designed to repel mud, dirt, snow or other contaminants.
Consistent efficiency: The drive boasts a long service life compared to that of a conventional chain, where efficiency is significantly reduced by wear or dirt.
Installing a Gates Carbon Drive Belt Drive requires a specially-made frame, therefore we strongly advise against using one to modify a conventional framework.
Manufacturer Numbers:
- 170.0 mm 46 tooth:
- FC S150 JIS 170 BLACK 46T CDN
- 175.0 mm 46 tooth:
- FC S150 JIS 175 BLACK 46T CDN
- 170.0 mm 50 tooth:
- FC S150 JIS 170 BLACK 50T CDN
- 175.0 mm 50 tooth:
- FC S150 JIS 175 BLACK 50T CDN
- 170.0 mm 55 tooth:
- FC S150 JIS 170 BLACK 55T CDN
- 175.0 mm 55 tooth:
- FC S150 JIS 175 BLACK 55T CDN
Contents:
- 1 x Gates S150 right crank arm
- 1 x Gates S150 left crank arm
- 1 x Gates CDN Belt Drive Sprocket, mounted (46, 50 or 55-tooth)
- 2 x crank bolts
- 100 day return period
- Online since 1998
- Trusted Shop 4.87 / 5.00
