Reset Racing Flatstack A / Konan ZS44/28.6 - EC44/30 Headset
Perfectly fits into the head tube: the Flatstack A / Konan ZS44/28.6 - EC44/30 headset by Reset Racing
The Reset Racing Flatstack A upper headset cup is characterised by a particularly flat design and high-quality angular contact ball bearings, as well as a complex sealing system. The Reset Racing Konan EC44/30 headset bottom assembly impresses with its special durability, as a sophisticated sealing system protects the bearings from dirt and water.
- Use:
- For 1 1/8" upper and lower head tubes combined with standard 1 1/8" forks.
Specifications:
- Application:
- All Mountain, Cross Country, Enduro, Road, Gravel, Cyclocross, City & Touring
- Top Cup:
- 1 1/8"
- Bottom Cup:
- 1 1/8"
- Steerer Tube:
- 1 1/8"
- Design:
- semi integrated (ZS) upper, standard Ahead (EC) lower
Technical Information:
- Material:
- aluminium (7075), composite (NBR)
- Bearings:
- angular contact ball, steel (upper), deep groove ball bearing, steel (lower)
- Upper Insert Depth:
- 11 mm
- Lower Insert Depth:
- 8.5 mm
- Top Stack Height:
- 3.5 mm
- Bottom Stack Height:
- 15 mm
- Top Outer Diameter:
- 44 mm
- Top Inner Diameter:
- 28.6 mm
- Bottom Outer Diameter:
- 44 mm
- Bottom Inner Diameter:
- 30 mm
- Seals:
- radial shaft seal, O-ring
Features:
- anodised
- laser engraved
Standardized Headset Identification System (S.H.I.S.):
In order to clarify and bring uniformity to a sea of headset standards, manufacturers Acros, Cane Creek, Hope, Race Face, Reset Racing and Ritchey have agreed upon using a shared nomenclature, which will likely include more participating companies in the future. This system takes into account a combination of frame and fork dimensions. Both the top and bottom parts of the headset are marked by two alphanumeric identifiers. The first identifier indicates the type of headset (External Cup, Zero Stack, Integrated) and head tube diameter. The second identifier - separated from the first by a backslash - indicates the diameter of the steerer tube. When referring to a complete headset, the specifications of both top and bottom parts must be combined.Nomenclature:
- EC:
- Bearings contained within headset cups that are located outside of the frame (External Cup)
- ZS:
- Bearings contained within pressed-in headset cups where the cup and bearings rest inside the frame (Zero Stack)
- IS:
- Bearings that fit directly into a bonded or machined interface that is integrated into the frame (Integrated)
Manufacturer Number:
7082 + 8548Contents:
- 1 x Reset Racing Flatstack A upper headset cup with stainless steel bearings
- 1 x Reset Racing Konan lower headset cup with stainless steel bearings
- 1 x Reset Racing Ahead top cap
- 1 x star nut with aluminium bolt
- 1 x undercover
- 1 x compression ring
- 1 x O-ring
- 1 x crown race
- 2 x O-ring
- 100 day return period
- Online since 1998
- Trusted Shop 4.87 / 5.00