Shimano OT-RS900 Shifter Cable Housing - 10 Pack

Shimano shift cable housing OT-RS900 for modern 11-speed road rear derailleurs - 10 Pack

The Shimano shift cable OT-RS900 housing must be used with current road and gravel rear derailleurs such as Dura-Ace RD-R9100, Ultegra RD-R8000, 105 RD-R7000, etc., as the cable is routed between the frame and the rear derailleur in a smaller radius. Standard OT-SP41 housing proves to be too stiff for this purpose. Ten OT-RS900 housings are supplied, each 240 mm long.

Specifications:

Application:

Road

Diameter:

4 mm

Length:

240 mm

Recommended Cable Diameter:

1.2 mm

Technical Information:

Liner:

polyethylene

Compatibility:

• RD-R9100
• RD-R8000
• RD-R7100
• RD-R7000
• RD-RX820
• RD-RX822
• RD-RX810
• RD-RX812
• RD-RX400

Features:

• pre-lubricated with special silicone grease to ensure smooth shifting

Note from the manufacturer:

The length of the OT-RS900 should be adjusted accordingly depending on the bicycle frame size. This is necessary for optimal performance. The OT-RS900 should be cut from the correct side when adjusting the length. One of the two ends is flare-processed. This flare-processed end is inserted into the barrel adjuster of the rear derailleur and should therefore remain there.

Technology:

OT-RS900
For Dura-Ace, Ultegra, 105, GRX and other 11-speed or 12-speed road and gravel rear derailleurs, Shimano has developed the special OT-RS900 cable housing. It is less stiff than the conventional OT-SP41 housing and is therefore better suited to the tight curve where the cable is routed from the frame to the rear derailleur. Thanks to OT-RS900, problems with the barrel adjuster can be prevented and the rear wheel can be removed more easily. OT-RS900 is not intended for use on the shift/brake lever side.

Manufacturer Numbers:

black:

Y-0BM98011

white:

Y-0BM98021

hi-tech grey:

Y-0BM98041

red:

Y-0BM98031

Contents:

• 10 x Shimano OT-RS900 shifter cable housing
• 10 x end caps, sealed, for rear derailleur
• 10 x Shimano long pointed end caps