Specialized Epic EVO Expert Carbon 29" Mountain Bike

The Specialized Epic EVO Expert 29" Mountain Bike - Sprints uphill and speeds downhill

The Epic EVO Expert from Specialized is a full-suspension carbon cross-country bike with electronic SRAM GX Eagle AXS 1x12-speed groupset, G2 RS 4-piston brake, X-Fusion Manic Dropper Post and carbon wheels. It stands for pure fun and speed, whether uphill or downhill. A Flip Chip allows you to adjust the head tube angle by half a degree and raise the bottom bracket by six millimetres, which lets you better adapt the handling to your riding style. The 120 mm RockShox suspension fork with Charger 2 RL and DebonAir is designed for pedalling efficiency, and also provides constant feedback throughout the travel. The seatpost impresses with infinitely adjustable travel, while the handmade wheelset by Roval with its 29 mm-wide tubeless-ready rims increases stiffness and helps save weight.

Information regarding the return of batteries and electrical equipment:

Information on the return and disposal of used batteries and electrical equipment can be found here.

Specifications:

Application:

Cross Country

Wheel Size:

29"

Front Travel:

120 mm

Rear Travel:

110 mm

Sizes:

XS, S, M, L, XL

Front Triangle Material:

carbon (11m)

Rear Triangle Material:

carbon (11m)

Components:

Frame:

FACT 11m carbon, progressive XC race geometry, internal cable routing, 12 x 148 mm Boost

Fork:

RockShox SID Select+, Charger 2 RL damping, DebonAir, 44 mm offset, 114 mm trail, 15 x 110 mm Boost

Stem:

Specialized Alloy Trail, 35.0 mm handlebar clamp

Handlebars:

Specialized, aluminium, 20 mm rise, 35.0 mm clamp

Grips:

Specialized Trail

Rear Shock:

RockShox SIDLuxe Select+, Rx XC Tune, Two Position, Rebound Adjust, 190 x 40 mm

Remote System:

none

Headset:

Specialized S142500003 (1 1/8" top, 1.5" bottom, IS)

Seatpost:

X-Fusion Manic, 0 mm setback, 30.9 mm, stroke: 100 mm (XS) / 125 mm (S, M), 150 mm (L, XL)

Saddle:

Specialized Body Geometry Power Sport, steel rails

Crank:

SRAM GX Eagle Alloy DUB, SRAM DUB BSA 73 mm bottom bracket, 32 T chainring

Pedals:

none

Brakes:

SRAM G2 RS, hydraulic disc brake, 4 pistons, 180 mm/180 mm

Shift Lever:

SRAM GX Eagle AXS Controller, 12-speed

Rear Derailleur:

SRAM GX Eagle AXS, 12-speed

Cassette:

SRAM XG-1275, 12-speed, 10-52 t

Chain:

SRAM GX Eagle, 12-speed

Rims:

Roval Control, carbon, offset design, 29 mm jaw width, 4 mm hook width, tubeless ready, 28 holes

Spokes:

DT Swiss Comp Race

Front Hub:

DT Swiss 350, 6-bolt disc, 15 x 110 mm thru-axle, straight pull, 28 holes

Rear Hub:

DT Swiss 350, 6-bolt disc, DT Swiss Ratchet, XD freehub body, 12 x 148 mm thru-axle, straight-pull, 28 holes

Front Tyre:

Specialized Ground Control, GRID carcass, T7 rubber compound, 29 x 2.35"

Rear Tyre:

Specialized Ground Control, GRID carcass, T7 rubber compound, 29 x 2.35"

Approved For:

Weight Limit:

109 kg (total load)

Rotor Size (max.):

180 mm (rear)

Tyre Size (max.):

29 x 2.4"

Chainrings:

1x

Chainring Size (max.):

1x 36-tooth

Features:

• 29-inch cross-country full-suspension bike with electronic SRAM gears
• competition-ready speed uphill and downhill
• ride characteristics adjustable via flip chip (steerer tube angle by 0.5°, bottom bracket by 6 mm)
• suspension fork with Charger 2 RL with two-position compression adjustment designed for pedalling efficiency
• easy tuning and consistent feel throughout the travel thanks to DebonAir spring
• rear shock with frame-matched Rx Tune
• seatpost with infinitely adjustable stroke
• handmade wheels from the Roval Specialized World Cup line for maximum stiffness, ride quality and durability with minimum weight
• internal cable routing
• 34.9 mm aluminium seat clamp
• standard tubes with Presta valve
• SRAM UDH universal derailleur hanger

Technology:

FACT
FACT is an acronym for " Functional Advanced Composite Technology" and summarises all the know-how that Specialized has in the use of carbon fibre. It is a holistic approach, which primarily concerns the bike frames, but is found in many components such as handlebars, stems, saddles etc. The starting point is always the awareness for the needs of riders and the capability to fulfil them. Next, the selection of fibres, resins and fabric layers takes place; in this process the quality of the carbon and the arrangement of the fibre layers play an important role. It is important to find the right set-up for the project at hand and the intended location or rather the area of application. It is often necessary to differentiate from model to model at several points. In the final step, attention is paid to processing the material in a way that allows the desired advantages in terms of low weight, rigidity and stability to be achieved.

Rider-First Engineered
Rider-First Engineered describes the design approach used by Specialized to precisely match each frame size to the target group. Simply put, smaller frames for smaller riders are built in a different way than larger frames for larger riders. This is done on the basis of performance parameters determined in practical tests, taking into account the forces acting on different areas of the bike when riders of different sizes ride it. Based on this analysis, the optimum tube dimensions and the appropriate carbon fibre covering for the respective frame size are determined. This way you can be sure that no matter what your height is, you will receive a bike that delivers optimal and controllable performance suited to your size.

Geometry:

(based on a fork axle to crown length of 530 mm and low bottom bracket height)
XS:

Recommended Height:

148 - 155 cm

Stack:

603 mm

Reach:

380 mm

Seat Tube Length:

375 mm

Effective Top Tube Length:

536 mm

Head Tube Length:

95 mm

Chainstay Length:

438 mm

Wheelbase:

1106 mm

Bottom Bracket Height:

326 mm

BB Drop:

46 mm

Seat Tube Angle:

75.5°

Head Tube Angle:

66.5°

Standover Height:

760 mm

Stem Length:

60 mm

Handlebar Width:

760 mm

Crank Arm Length:

165.0 mm

Saddle width:

155 mm

S:

Recommended Height:

158 - 165 cm

Stack:

593 mm

Reach:

406 mm

Seat Tube Length:

400 mm

Effective Top Tube Length:

567 mm

Head Tube Length:

95 mm

Chainstay Length:

438 mm

Wheelbase:

1132 mm

Bottom Bracket Height:

336 mm

BB Drop:

36 mm

Seat Tube Angle:

74.8°

Head Tube Angle:

66.5°

Standover Height:

779 mm

Stem Length:

60 mm

Handlebar Width:

760 mm

Crank Arm Length:

170.0 mm

Saddle width:

155 mm

M:

Recommended Height:

165 - 178 cm

Stack:

597 mm

Reach:

436 mm

Seat Tube Length:

430 mm

Effective Top Tube Length:

602 mm

Head Tube Length:

100 mm

Chainstay Length:

438 mm

Wheelbase:

1164 mm

Bottom Bracket Height:

336 mm

BB Drop:

36 mm

Seat Tube Angle:

74.5°

Head Tube Angle:

66.5°

Standover Height:

781 mm

Stem Length:

60 mm

Handlebar Width:

760 mm

Crank Arm Length:

175.0 mm

Saddle width:

143 mm

L:

Recommended Height:

178 - 185 cm

Stack:

611 mm

Reach:

460 mm

Seat Tube Length:

470 mm

Effective Top Tube Length:

629 mm

Head Tube Length:

115 mm

Chainstay Length:

438 mm

Wheelbase:

1194 mm

Bottom Bracket Height:

336 mm

BB Drop:

36 mm

Seat Tube Angle:

74.5°

Head Tube Angle:

66.5°

Standover Height:

793 mm

Stem Length:

60 mm

Handlebar Width:

760 mm

Crank Arm Length:

175.0 mm

Saddle width:

143 mm

XL:

Recommended Height:

185 - 193 cm

Stack:

629 mm

Reach:

485 mm

Seat Tube Length:

520 mm

Effective Top Tube Length:

659 mm

Head Tube Length:

115 mm

Chainstay Length:

438 mm

Wheelbase:

1227 mm

Bottom Bracket Height:

336 mm

BB Drop:

36 mm

Seat Tube Angle:

74.5°

Head Tube Angle:

66.5°

Standover Height:

804 mm

Stem Length:

60 mm

Handlebar Width:

760 mm

Crank Arm Length:

175.0 mm

Saddle width:

143 mm

Manufacturer Number:

satin rusted red-blaze-pearl:

94823-31

Shipping Notice:

The shipment is sent pre-assembled by a forwarding agent.
The delivery time is extended by 2-5 days, depending on the overall volume of orders.
For individual consultation, please contact our customer service team.

Contents:

• 1 x Specialized Epic EVO Expert Carbon 29" Mountain Bike