DT Swiss ER 1400 DICUT 25 Disc Center Lock 28" Wheelset

The DT Swiss ER 1400 DICUT 25 Center Lock Disc 28" wheelset - for endurance rides
The ER 1400 DICUT 25 Center Lock Disc 28" wheelset by DT Swiss is suitable for your endurance road bike. With the 25 mm deep rim you are fast in the hills and on the flat. The construction consists of an aerodynamic 240 DICUT hub with straight-pull spokes, Pro Lock nipples as well as a robust rim. This means that you can also master bumps such as cobblestone sectors without any problems. The precise Ratchet EXP freehub is particularly low-wear and has 36 engagement points. This means that you immediately gain propulsion when you push the pedals hard. In addition, maintenance of the ratchet system is particularly easy, as you can disassemble the freehub without tools.

black/100 mm/28"/142 mm/SRAM XDR/Non Boost/Non Boost:

Wheel size:

28"

Dimension (ETRTO):

22-622

Rim height:

25 mm

Rear Wheel Standard:

Non Boost

Front Wheel Standard:

Non Boost

black/100 mm/28"/142 mm/SRAM XDR/Non Boost/Non Boost:

Front installation width:

100 mm

Axle diameter front:

12 mm

Axle diameter rear:

12 mm

Rear installation width:

142 mm

Freehub:

SRAM XDR

Gear steps:

11-/12-speed

Intended use: Category 2
Suitable for use on predominantly paved and partially unpaved ground with a slight slope and a temporary loss of ground contact as well as drops of up to 15 cm.

Pro Lock
The nipple thread is coated with two-component adhesive to increase the durability of the wheels. It can still be re-trued several times without any problems, but the adhesive strength decreases slightly. The connection between the spoke and nipple cannot loosen by itself.

Ratchet EXP
A ratchet and a threaded ring are integrated into the hub. This reduces the number of components required, resulting in less wear and tear and a lower weight. In addition, the heavy-duty and reliable ratchet system can be easily and quickly maintained. The no-tool concept plays a decisive role, as it allows the freehub to be replaced without any tools. The freehub has two ratchets which engage simultaneously. This means that the contact surface is large and the point load is kept small, which relieves the material and allows the freehub to work particularly reliably and precisely.

SPLINE
Straight pull hubs, straight spokes and strong rims result in a durable wheel. It can therefore be reliably used in training and competition.

• black/100 mm/28"/142 mm/SRAM XDR/Non Boost/Non Boost: 1589 g

DT Swiss Deutschland GmbH
Albert-Einstein-Straße 3
59302 Oelde
Germany
info.de@dtswiss.com