OneUp Components EDC Lite Multi-Tool

The EDC Lite Multi-Tool from OneUp Components - A practical companion in the steerer tube

The OneUp Components EDC Lite Multi-Tool has nine functions and can be easily stored in the steerer tube via a special container. In contrast to the well-known EDC and EDC V2 tool set, no special threads have to be carved out and no special stem is necessary. The only requirement is that the fork has an Ahead star nut. The star nut is first pressed deeper using the included long bolt and a suitable hammer (not included). Insert the empty container about 7 cm deep into the steerer tube and fasten it to the star nut from the underside using the included short bolt. Now nothing can stand in the way of transporting the multi-tool in the fork. A plastic cap that replaces the stem cap helps pull the EDC Lite out of the container. Thanks to this practical and space-saving companion, you will never again be without the most important tool on the trail.

Specifications:

Function:

multi-tool w/ 9 functions

Tool Type:

Wrenches, screwdrivers

Type:

Hex tool, torx tool, flat headed screwdriver

Technical Information:

Material:

steel, aluminium

Functions:

• 2 mm hex
• 2.5 mm hex
• 3 mm hex
• 4 mm hex
• 5 mm hex
• 6 mm hex
• 8 mm hex
• Torx T25
• flat-head screwdriver

Compatibility:

Steerer tube:

Material:

aluminium, steel

Type:

with Ahead star nut

Shape:

1 1/8" , 1 1/8" - 1.5" tapered

Length:*

• Fox Racing Shox except Fox 38: 190 mm
• Fox 38 and RockShox: 210 mm
• in general, the long bolt must be inserted 8.5 cm deep

Minimum inner diameter:

24.1 mm

Maximum inner diameter:

34 mm

*Stem length measured from the bottom of the fork crown to above the stem spacers or the stem (if no spacers are used)

Features:

• multi-tool with container for transporting inside the steerer tube
• incl. all essential tools for on-the-go
• easy to install in minutes, without removing the star nut or cutting a thread
• container has the same colour as the OneUp Components comp pedals, grips, chain guides and handlebar decals

Manufacturer Numbers:

black:

1C0701BLK

red:

1C0701RED

blue:

1C0701BLU

green:

1C0701GRN

orange:

1C0701ORA

purple:

1C0701PUR

turquoise:

1C0701TUR

Contents:

• 1 x OneUp Components EDC Lite multi-tool
• 1 x OneUp Components EDC Lite container
• 1 x long bolt (EDC Lite Bolt)
• 1 x short bolt (Star Nut Setter Bolt)
• 1 x plastic cap