Specialized Enduro Expert Carbon 29" Mountain Bike
The Enduro Expert 29" mountain bike by Specialized - more powerful and faster than ever before
The Specialized Enduro Expert is a carbon bike with downhill DNA, equipped with SRAM X01 Eagle 1x12-speed gears, Code RS brakes and a Fox 38 170 mm suspension fork. It scores with stiffness, speed and directional stability. The low position of the rear shocks and dampers, and the fixed, Flip Chip adjustable suspension ensure precise handling even on steep, rocky trails. Step on the pedal and be amazed how efficiently the bike accelerates. Due to the revised chainstay angle and improved shock linkages, momentum is converted directly into speed without bobbing, both uphill and downhill. A flatter head tube angle, a longer reach and a steeper seat tube also contribute to the Enduro's liveliness. This means you can maintain control on difficult terrain with more confidence than ever.
Specifications:
- Application:
- Enduro
- Wheel Size:
- 29"
- Front Travel:
- 170 mm
- Rear Travel:
- 170 mm
- Sizes:
- S2, S3, S4, S5
- Front Triangle Material:
- carbon (11m)
- Rear Triangle Material:
- carbon (11m)
Components:
- Frame:
- Specialized Enduro Carbon, SWAT technology, 12 x 148 mm Boost
- Fork:
- Fox Racing Shox Float 38 Performance Elite, GRIP2 damping, 44 mm offset, 132 mm trail, 15 x 110 mm Boost
- Stem:
- Specialized Alloy Trail, 35 mm handlebar clamp
- Handlebars:
- Specialized Trail, aluminium (7050), 8° backsweep, 6° upsweep, 30 mm rise
- Grips:
- Deity Knuckleduster
- Rear Shock:
- Fox Racing Shox Float X2 Performance, Rx Trail Tune, 2-Position Adjust, Low-Speed-Rebound and -Compression Adjust, 205 x 60 mm, Trunnion
- Remote System:
- none
- Seatpost:
- OneUp Components Dropper Post V2, 34.9 mm, infinitely adjustable, MMX
- Saddle:
- Specialized Bridge Comp, hollow CrMo steel struts
- Crank:
- SRAM Descendant 7K DUB, SRAM DUB BSA 73 mm bottom bracket, 30 T chainring
- Pedals:
- none
- Brakes:
- SRAM Code RS, hydraulic disc brake, 4 pistons, 220 mm/200 mm (front/rear)
- Shift Lever:
- SRAM X01 Eagle Trigger, 12-speed
- Rear Derailleur:
- SRAM X01 Eagle, 12-speed
- Cassette:
- SRAM XG-1295, 12-speed, 10-52 t
- Chain:
- SRAM GX Eagle, 12-speed
- Rims:
- Roval Traverse 29, aluminium, 30 mm jaw width, handmade, 2Bliss Ready
- Spokes:
- DT Swiss Competition Race
- Front Hub:
- Roval, sealed cartridge bearings, 15 x 110 mm thru-axle, 28 holes
- Rear Hub:
- Roval DT Swiss 370, Ratchet LN, SRAM XD, 12 x 148 mm thru-axle, 28 holes
- Front Tyre:
- Specialized Butcher, Grid Trail casing, GRIPTON® T9 rubber compound, 2Bliss Ready, 29 x 2.3"
- Rear Tyre:
- Specialized Eliminator, Grid Trail casing, GRIPTON T7 rubber compound, 29 x 2.3"
Approved For:
- Weight Limit:
- 125 kg (rider + gear)
- Rotor Size (max.):
- 220 mm
- Tyre Size (max.):
- 29 x 2.6" (rear wheel)
- Chainrings:
- 1x
- Chainring Size (max.):
- 1x 36-tooth
Features:
- enduro mountain bike with Fox suspension and SRAM X01 Eagle drivetrain
- control and speed on the most difficult trails
- high pedalling efficiency
- flat, low, extended DH geometry
- SWAT opening in the down tube
- internal cable routing
- flip-chip on the shock eye with low (preset) and high settings for varying the bottom bracket height
- Specialized aluminium seat clamp, 38.6 mm
- standard inner tubes with Presta valves
Technology:
FACTFACT is an acronym for " Functional Advanced Composite Technology" and summarises all the know-how that Specialized has in the use of carbon fibre. It is a holistic approach, which primarily concerns the bike frames, but is found in many components such as handlebars, stems, saddles etc. The starting point is always the awareness for the needs of riders and the capability to fulfil them. Next, the selection of fibres, resins and fabric layers takes place; in this process the quality of the carbon and the arrangement of the fibre layers play an important role. It is important to find the right set-up for the project at hand and the intended location or rather the area of application. It is often necessary to differentiate from model to model at several points. In the final step, attention is paid to processing the material in a way that allows the desired advantages in terms of low weight, rigidity and stability to be achieved.
FSR
The Specialized FSR linkage design is based on a four-joint design with Horst Link in the chainstay, which separates the seat stay from the main pivot point of the rear triangle. This allows the pedal and brake force to be decoupled from the suspension, so that the compression and rebound are solely dependent on the nature of the terrain. This not only converts more energy into forward drive which is direct and without rocking, but also leads to more traction and thus more control. In addition, the FSR system can be fine-tuned to all the possible areas of applications and terrains.
SWAT
SWAT is the acronym for " Storage, Water, Air, Tools" and describes a whole range of solutions that Specialized offers for space-saving accessories. There are SWAT elements that are built into Specialized frames from the get-go, such as the opening below the bottle cage on certain mountain and gravel bikes. And there are SWAT components which can be retrofitted to any wheel, e.g. the Conceal Carry Tool or the EMT Cage Mount Tools for SWAT bottle cages. The aim is to always use an existing, unused space to carry accessories such as drinking bottles, inner tubes, tools or CO2 cartridges, while being within easy reach, in a safe space and without impairing the aerodynamics. This often results in backpacks or bags being out of the question and emergency solutions such as spare tubes tied to the frame are something that everyone wants to avoid.
Geometry:
(based on a fork axle to crown length of 581 mm)S3:
- Recommended Height:
- 165 - 180 cm
- Stack:
- 620 mm (Low)
- Reach:
- 464 mm (Low)
- Seat Tube Length:
- 420 mm
- Effective Top Tube Length:
- 619 mm
- Head Tube Length:
- 100 mm
- Chainstay Length:
- 442 mm
- Wheelbase:
- 1246 mm
- Bottom Bracket Height:
- 347 mm (Low), 354 mm (High)
- BB Drop:
- 28 mm (Low), 21 mm (High)
- Seat Tube Angle:
- 76°
- Head Tube Angle:
- 63.9° (Low), 64.3° (High)
- Stem Length:
- 50 mm
- Handlebar Width:
- 800 mm
- Crank Arm Length:
- 170.0 mm
- Saddle width:
- 143 mm
- Seatpost adjustment travel:
- 180 mm
S4:
- Recommended Height:
- 173 - 188 cm
- Stack:
- 629 mm (Low)
- Reach:
- 487 mm (Low)
- Seat Tube Length:
- 440 mm
- Top Tube Length:
- 644 mm
- Head Tube Length:
- 110 mm
- Chainstay Length:
- 442 mm
- Wheelbase:
- 1274 mm
- Bottom Bracket Height:
- 347 mm (Low), 354 mm (High)
- BB Drop:
- 28 mm (Low), 21 mm (High)
- Seat Tube Angle:
- 76°
- Head Tube Angle:
- 63.9° (Low), 64.3° (High)
- Stem Length:
- 50 mm
- Handlebar Width:
- 800 mm
- Crank Arm Length:
- 170.0 mm
- Saddle width:
- 143 mm
- Seatpost adjustment travel:
- 180 mm
S5:
- Recommended Height:
- 175 - 193 cm
- Stack:
- 638 mm (Low)
- Reach:
- 511 mm (Low)
- Seat Tube Length:
- 465 mm
- Top Tube Length:
- 670 mm
- Head Tube Length:
- 120 mm
- Chainstay Length:
- 442 mm
- Wheelbase:
- 1302 mm
- Bottom Bracket Height:
- 347 mm (Low), 354 mm (High)
- BB Drop:
- 28 mm (Low), 21 mm (High)
- Seat Tube Angle:
- 76°
- Head Tube Angle:
- 63.9° (Low), 64.3° (High)
- Stem Length:
- 50 mm
- Handlebar Width:
- 800 mm
- Crank Arm Length:
- 170.0 mm
- Saddle width:
- 143 mm
- Seatpost adjustment travel:
- 210 mm
Manufacturer Number:
- satin doppio-sand:
- 93622-310
Shipping Notice:
The shipment is sent pre-assembled by a forwarding agent.The delivery time is extended by 2-5 days, depending on the overall volume of orders.
For individual consultation, please contact our customer service team.
Contents:
- 1 x Specialized Enduro Expert Carbon 29" mountain bike
- 100 day return period
- Online since 1998
- Trusted Shop 4.86 / 5.00