Cannondale Jekyll 1 Carbon 29" Mountain Bike

Item number: 86904
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
Jekyll 1 Carbon 29" Mountain Bike - beetle green/L
  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.89 / 5.00

The Jekyll 1 Carbon 29" Mountain Bike by Cannondale with SRAM components and technical highlights


The Cannondale Jekyll 1 29" mountain bike made of carbon is a downhill-oriented enduro full-suspension bike with SRAM drivetrain and Fox suspension elements, which comes up with some technical refinements. The Gravity Cavity, which hides the shock in the down tube for a low centre of gravity, and the Guidler above the chainring, a combination of idler pulley and chain guide, are particularly eye-catching. This prevents chain drop and pedal kickback during compression, which results from the higher main pivot point. The main pivot point is not near the bottom bracket as usual, but clearly above it. This results in a backward axle travel, which in turn causes the rear triangle to glide very smoothly and fluidly over obstacles without slowing you down. Thanks to Proportional Response, the frame design is individually adapted to each frame size, from geometry to chainstay length to linkage design. However, that's not all: the rear triangle with Ai Offset offers great tyre clearance with rather short chainstays and a stiff rear wheel thanks to even spoking. The result is a bike with outstanding efficiency, strong grip, high smoothness and agility, which makes you want to go downhill again.

Specifications:

Application:
Enduro, All Mountain
Wheel Size:
29"
Front Travel:
170 mm
Rear Travel:
165 mm
Sizes:
S, M, L, XL
Front Triangle Material:
Carbon
Rear Triangle Material:
Carbon

Components:

Frame:
Cannondale Jekyll, Carbon, Proportional Response Tuned, Ai Offset
Fork:
Fox Racing Shox Float Factory 38, 15 x 110 mm (Boost), 44 mm offset
Stem:
FSA Grid 35, 35 mm
Handlebars:
Cannondale 1 Riser, carbon, 30 mm rise, 8° backsweep, 5° upsweep, 780 mm
Grips:
fabric FunGuy
Rear Shock:
Fox Racing Shox Float Factory X2, High-/low speed compression, High-/Low-Speed Rebound
Remote System:
none
Headset:
Integrated Sealed Bearing, Tapered
Seatpost:
Cannondale DownLow Dropper with Matchmaker, 31.6 mm, stroke: 125 mm (S), 150 mm (M), 170 mm (L, XL)
Saddle:
fabric Scoop Shallow Elite, hollow steel rails (CrMo)
Crank:
SRAM X1 Eagle B148, 30-tooth, 55 mm chainline
Pedals:
none
Brakes:
SRAM Code RSC hydraulic, Centerline brake rotors, 220 mm (front) / 200 mm (rear)
Shift Lever:
SRAM GX Eagle, 12-speed
Rear Derailleur:
SRAM GX Eagle, 12-speed
Cassette:
SRAM GX Eagle XG-1275, 10-52 teeth, 12-speed
Chain:
SRAM NX Eagle, 12-speed
Rims:
WTB KOM Trail i30 TCS, 32 holes, tubeless ready
Spokes:
DT Swiss Factory J-Bend
Front Hub:
Formula, 15 x 110 mm
Rear Hub:
SRAM MTH 700, 12 x 148 mm, SRAM XD freehub
Front Tyre:
Maxxis Assegai, 29 x 2.5" , 3C, EXO+, tubeless ready
Rear Tyre:
Maxxis Minion DHR II, 29 x 2.4" , EXO+, tubeless ready

Approved For:

Weight Limit:
138 kg (rider + gear)
Rotor Size (max.):
220 mm (front), 203 mm (rear)
Tyre Size (max.):
29 x 2.5"
Chainrings:
1x
Fork Axle to Crown Size (max.):
581 mm

Features:

  • Proportional Response geometry concept: chainstay lengths, frame design and damping behaviour are matched to frame size
  • Gravity Cavity: shock position in down tube for low centre of gravity, with down tube protection
  • 4-bar linkage design for ideal anti-rise and anti-squat behaviour, thus high braking traction, drive efficiency and high grip
  • with Guidler: combination of idler pulley and chain guide prevents pedal kickback on uneven terrain
  • high main pivot point for rearward axle travel, allowing higher speed and greater tyre clearance
  • 55 mm chainline

Technology:

Ai Offset
Asymmetric integration (Ai) places the drivetrain 6 mm further out than original drivetrains with 142 mm rear wheel over locknut dimension and 3 mm further out than standard 148 mm configurations. This is achieved through an asymmetrical rear triangle. This results in increased tyre clearance, not only but also when using a front derailleur. This in turn allows for shorter chainstays, which brings high traction and nimble handling. Furthermore, there are advantages in the rear wheel construction: the spokes on the left and right have the same length, tension and angle, so you benefit from a wheel that is up to 60% stiffer without having to compromise. To implement the offset, the chainring is also set further the outside.

Geometry:

S:
Recommended Height:
157 cm - 165 cm
Stack:
625 mm
Reach:
425 mm
Seat Tube Length:
390 mm
Top Tube Length:
569 mm
Effective Top Tube Length:
541 mm
Head Tube Length:
100 mm
Chainstay Length:
430 mm
Wheelbase:
1193 mm
Bottom Bracket Height:
348 mm
BB Drop:
30 mm
Seat Tube Angle:
77.5°
Head Tube Angle:
64°
Standover Height:
750 mm
Stem Length:
35 mm
Handlebar Width:
780 mm
Crank Arm Length:
165 mm

M:
Recommended Height:
162 cm - 175 cm
Stack:
634 mm
Reach:
450 mm
Seat Tube Length:
410 mm
Top Tube Length:
608 mm
Effective Top Tube Length:
569 mm
Head Tube Length:
110 mm
Chainstay Length:
435 mm
Wheelbase:
1227 mm
Bottom Bracket Height:
348 mm
BB Drop:
30 mm
Seat Tube Angle:
77.5°
Head Tube Angle:
64°
Standover Height:
750 mm
Stem Length:
35 mm
Handlebar Width:
780 mm
Crank Arm Length:
165 mm

L:
Recommended Height:
172 cm - 182 cm
Stack:
643 mm
Reach:
475 mm
Seat Tube Length:
445 mm
Top Tube Length:
623 mm
Effective Top Tube Length:
588 mm
Head Tube Length:
120 mm
Chainstay Length:
442 mm
Wheelbase:
1264 mm
Bottom Bracket Height:
348 mm
BB Drop:
30 mm
Seat Tube Angle:
77.5°
Head Tube Angle:
64°
Standover Height:
760 mm
Stem Length:
35 mm
Handlebar Width:
780 mm
Crank Arm Length:
170 mm

XL:
Recommended Height:
180 cm - 195 cm
Stack:
652 mm
Reach:
510 mm
Seat Tube Length:
500 mm
Top Tube Length:
660 mm
Effective Top Tube Length:
627 mm
Head Tube Length:
130 mm
Chainstay Length:
450 mm
Wheelbase:
1311 mm
Bottom Bracket Height:
348 mm
BB Drop:
30 mm
Seat Tube Angle:
77.5°
Head Tube Angle:
64°
Standover Height:
770 mm
Stem Length:
35 mm
Handlebar Width:
780 mm
Crank Arm Length:
170 mm

Manufacturer Number:

C21202U

Shipping Notice:

The shipment is sent pre-assembled by a forwarding agent.
The delivery time is extended by 2-5 days, depending on the overall volume of orders.
For individual consultation, please contact our customer service team.

Contents:

  • 1 x Cannondale Jekyll 1 Carbon 29" Mountain Bike

Models:

  • beetle green/S, in stock
    6,058.82€
  • beetle green/M, in stock
    6,058.82€
  • beetle green/XL, in stock
    6,058.82€

Rate this product

Be the first and leave your opinion!

Customer Reviews

no reviews yet
5
0
4
0
3
0
2
0
1
0

Your opinion counts!

Be the first and leave a comment!