Cane Creek 40 IS42/28.6 - IS52/40 Tapered Headset
Item number: 61936
- 100 day return period
- Online since 1998
- Trusted Shop 4.91 / 5.00
Use: Designed for 1 1/8" upper head tube diameters combined with standard 1 1/8" forks and 1.5" lower head tube diameters combined with 1.5" forks.
Upper Bearings: 1 1/8"
Lower Bearings: 1.5"
Steerer Tube: 1 1/8" - 1.5" tapered
Design: integrated (IS)
Material: aluminium (6061-T6)
Bearings: stainless steel, sealed
Upper Stack Height: 9 mm
Lower Stack Height: 1 mm
Upper Outer Diameter: 42 mm
Upper Inner Diameter: 28.6 mm
Lower Outer Diameter: 52 mm
Lower Inner Diameter: 40 mm
- value set
- made of aluminium
- internally machined for minimum weight
- clip seal completely seals the upper components and accommodates the compression ring (reduces number of loose individual parts)
- lower High-Quality-Low-Friction seal
- durable bearing cones
- reliable, sealed cartridge bearings
In order to clarify and bring uniformity to a sea of headset standards, manufacturers Acros, Cane Creek, Hope, Race Face, Reset Racing and Ritchey have agreed upon using a shared nomenclature, which will likely include more participating companies in the future. This system takes into account a combination of frame and fork dimensions. Both the upper and lower part of the headset are marked by two alphanumeric identifiers. The first identifier indicates the type of headset (External Cup, Zero Stack, Integrated) and head tube diameter. The second identifier - separated from the first by a backslash - indicates the diameter of the steerer tube. When referring to a complete headset, the specifications of both upper and lower parts must be combined.
EC: Bearings contained within cups that are located outside of the frame (external cup).
ZS: Bearings contained within pressed-in cups where the cup and bearings rest inside the frame (zero stack).
IS: Bearings that fit directly into a bonded or machined interface that is integrated into the frame (integrated).
tpi treads per inch
IS42/28.6
- Design: integrated (IS)
- Application: upper
- Steerer Tube: 28.6 mm
- Head Tube (Frame Inner Diameter): 42 mm
IS52/40
- Design: integrated (IS)
- Application: lower
- Crown Steerer Tube: 40 mm
- Head Tube (Frame Inner Diameter): 52 mm
BAA0783K
- 1 x Cane Creek upper dust cap
- 1 x Cane Creek compression ring
- 1 x Cane Creek crown race
- 1 x Cane Creek top cap
- 1 x Cane Creek star nut
- 1 x Cane Creek hex bolt
- incl. incl. stainless steel bearings
Specifications:
Upper Bearings: 1 1/8"
Lower Bearings: 1.5"
Steerer Tube: 1 1/8" - 1.5" tapered
Design: integrated (IS)
Technical Information:
Material: aluminium (6061-T6)
Bearings: stainless steel, sealed
Upper Stack Height: 9 mm
Lower Stack Height: 1 mm
Upper Outer Diameter: 42 mm
Upper Inner Diameter: 28.6 mm
Lower Outer Diameter: 52 mm
Lower Inner Diameter: 40 mm
Features:
- value set
- made of aluminium
- internally machined for minimum weight
- clip seal completely seals the upper components and accommodates the compression ring (reduces number of loose individual parts)
- lower High-Quality-Low-Friction seal
- durable bearing cones
- reliable, sealed cartridge bearings
Standardized Headset Identification System (S.H.I.S.):
In order to clarify and bring uniformity to a sea of headset standards, manufacturers Acros, Cane Creek, Hope, Race Face, Reset Racing and Ritchey have agreed upon using a shared nomenclature, which will likely include more participating companies in the future. This system takes into account a combination of frame and fork dimensions. Both the upper and lower part of the headset are marked by two alphanumeric identifiers. The first identifier indicates the type of headset (External Cup, Zero Stack, Integrated) and head tube diameter. The second identifier - separated from the first by a backslash - indicates the diameter of the steerer tube. When referring to a complete headset, the specifications of both upper and lower parts must be combined.
Nomenclature:
EC: Bearings contained within cups that are located outside of the frame (external cup).
ZS: Bearings contained within pressed-in cups where the cup and bearings rest inside the frame (zero stack).
IS: Bearings that fit directly into a bonded or machined interface that is integrated into the frame (integrated).
tpi treads per inch
Models:
IS42/28.6
- Design: integrated (IS)
- Application: upper
- Steerer Tube: 28.6 mm
- Head Tube (Frame Inner Diameter): 42 mm
IS52/40
- Design: integrated (IS)
- Application: lower
- Crown Steerer Tube: 40 mm
- Head Tube (Frame Inner Diameter): 52 mm
Manufacturer Number:
BAA0783K
Contents:
- 1 x Cane Creek upper dust cap
- 1 x Cane Creek compression ring
- 1 x Cane Creek crown race
- 1 x Cane Creek top cap
- 1 x Cane Creek star nut
- 1 x Cane Creek hex bolt
- incl. incl. stainless steel bearings