- 100 day return period
- Online since 1998
- Trusted Shop 4.84 / 5.00
Application: Road, Cross Country, City
Upper Cup: 1 1/8"
Lower Cup: 1 1/8"
Steerer Tube: 1 1/8"
Design: semi integrated (ZS)
Bearings: angular contact ball bearings (36°/ 45° ACB)
Upper Insert Depth: 10 mm
Lower Insert Depth: 10 mm
Upper Stack Height: 16.9 mm
Lower Stack Height: 3.2 mm
Upper Outer Diameter: 44 mm
Upper Inner Diameter: 28.6 mm
Lower Outer Diameter: 44 mm
Lower Inner Diameter: 30 mm
Seals: black seal
Top Cap: aluminium, 8 mm (black or white)
Standardized Headset Identification System (S.H.I.S.):
The Standardized Headset Identification System (S.H.I.S.) creates a common language for describing modern bicycle headsets. The system provides comprehensive and scalable headset fitment information in a standardized format; making it easy to communicate headset requirements based on frame and fork interfaces. The system addresses the critical interface dimensions required to fit a fork to a frame, as well as bearing location/cup type. To determine fit, four dimensions are needed: (1) stem-clamp diameter of fork, (2) crown-race seat diameter of fork, (3) head-tube top inside diameter, and (4) head-tube bottom inside diameter. Bearing location and cup-type are identified as (a) external cup (EC), (b) semi-integrated or zero stack (ZS), or (c) integrated (IS).
EC: Bearings contained within cups that are located outside of the frame (external cup).
ZS: Bearings contained within pressed-in cups where the cup and bearings rest inside the frame (zero stack).
IS: Bearings that fit directly into a bonded or machined interface that is integrated into the frame (integrated).
Manufacturer Part Numbers:
- 1 x FSA Orbit Z upper bearing cup, incl. bearings
- 1 x FSA Orbit Z lower bearing cup, incl. bearings
- 1 x FSA headset cap
- 1 x compression ring
- 1 x FSA Ahead cap
- 1 x star nut with aluminium bolt
- 1 x crown race
- black/ZS44/28.6 - ZS44/30: 89 g