OneUp Components Switch V2 Chainring

OneUp Components Switch V2 chainring - practical, versatile, inexpensive<\/h2>
The OneUp Components Switch V2 chainring is part of the Switch Direct Mount chainring system and unlike previous Switch chainrings is also compatible with Shimano Hyperglide+ 12-speed chains. Thanks to OneUp Switch you can change the chainring in almost no time at all. Only a 4 mm Allen key is required to complete the set-up in the shortest possible time and the crank does not need to be removed. So if a steep trail gets in your way, you can switch to a smaller chainring in the parking lot. The Switch chainrings are uncompromisingly optimised and have already been successfully tested on the Enduro World Series. Their narrow-wide structure prevents the chain from dropping. And you'll save money with them too, because a OneUp Components Switch replacement chainring costs less than a new Direct Mount chainring.

black | 34 | 34:

Crank speed:

Single-speed

Teeth:

34

black | 34 | 34:

Material:

Aluminum

Chainring Material:

Aluminium (7075-T6)

Gear Ratio Crank:

34

• all 8-/9-/10-/11-speed chains
• SRAM Eagle 12-speed chains
• Shimano Hyperglide+ (HG +) 12-speed chains
• can only be used in conjunction with the {%product=56446|title=Switch Carrier Spider%}

• chainring swap in under a minute (manufacturer specification)
• quick adaptation of the set-up to the conditions
• less cost for spare chainrings
• narrow-wide structure ensures the chain won't drop
• requires only a 4 mm hex key, cranks don't need to be removed

• black | 34 | 34: 1C0652BLK

• 1 x OneUp Components Switch V2 chainring