Praxis Works Cadet Gen2 M30 MTB Crank

The Cadet crank by Praxis Works for cross-country use consists of two forged aluminium crank arms and an axle for M30 bottom brackets. In the second generation, it features a revised 3-bolt Direct Mount interface that makes it compatible with different chainlines.

Specifications:

Application:

Cross Country, All Mountain

Compatibility:

1x

Chainring Mount:

Praxis Works Direct Mount

Technical Information:

Crank Arm Material:

Aluminium

Axle Material:

Aluminium

Crank Arm Length:

165.0 mm, 170.0 mm, 175.0 mm

Chainline:

dependent on chainring

Q-Factor:

172 mm

Axle Diameter:

30 / 28 mm

Compatible BSA Shell Width:

73 mm

Recommended Bottom Bracket:

Praxis Works M30 (BSA, BB30, PF30, BB30/ 92, T47 external)

Recommended Chain:

10-speed, 11-speed, 12-speed

Compatibility:

• chainring with 6 mm offset: 49 mm chainline
• chainring with 3 mm offset: 52 mm chainline
• chainring with 0 mm offset: 55 mm chainline
• chainring with -1 mm offset: 56 mm chainline

Note from the manufacturer:

On the back of the right Cadet G2 crank arm you will find a sticker that outlines offset options for your desired chainline.

Features:

• stiff, solid crank arms made of forged aluminium
• robust, forged aluminium axle for M30 bottom bracket
• revised 3-bolt mount for Direct Mount chainrings from various manufacturers
• 8 mm aluminium crank bolt with remover (50 Nm)

Technology:

M30
Praxis Works M30 bottom brackets are only suitable for use with Praxis Works M30 cranks. The M30 axle corresponds to a kind of " oversize GXP" . It is 30 mm thick and reduced to 28 mm on the left end to fit the non-drive side bearings. A shaft washer is used at the drive side to provide preload and a 30 mm bearing, which is opposed by a 28 mm bearing at the non-drive side. M30 combines the advantages of wide bearings with the benefits of a sturdy 30 mm axle. This enables a secure fit and better power transmission.

Manufacturer Numbers:

165.0 mm:

G2-C165

170.0 mm:

G2-C170

175.0 mm:

G2-C175

Contents:

• 1 x Praxis Works Cadet G2 M30 right crank arm with axle
• 1 x Praxis Works Cadet G2 M30 left crank arm

• black | 170,0 mm | without chainring: 558 g

JBS GmbH & Co. KG
Ernst-Abbe-Straße 28
52249 Eschweiler
Germany
info@jbs-trading.de