RAAW Mountain Bikes Yalla! 29" Frameset w/ Fox DHX2 HSC/LSC HSR/LSR Factory

The RAAW Mountain Bikes Yalla! frameset with Fox DHX2 HSC/LSC HSR/LSR Factory shock for ambitious racers on downhill tracks

The Yalla! frameset from RAAW Mountain Bikes, here supplemented by a Fox DHX2 Factory steel coil shock, is your basis for a downhill bike that you can optimally adjust to different race tracks as well as your riding style. The DHX2 shock from Fox Racing Shox's Factory series offers maximum adjustment options for high- and low-speed compression damping and rebound, and you can select the appropriate suspension stiffness directly. The frame delivers 198 mm of travel and was designed to wrest crucial seconds from the Champéry World Cup downhill course. Of course, the Yalla! also shines in other ways. It offers you an unbeatable number of possibilities to adjust small settings that can be decisive for the track ahead: you can alter the chainstay length by replacing the thru-axle and inserts at the dropout. With the help of different headset cups you can adjust the reach and also the head tube angle. But that's not all: the ball-bearing lower shock mount can also be changed, which allows you to adjust the bottom bracket height and fine-tune the progression.
Too many options for you for now? Then enjoy your riding experience using the standard setup! In this, the gear ratio starts just below 3.1:1 and then draws an even characteristic curve through the suspension travel up to a progression of 25%. High pedalling efficiency at low suspension travel is ensured by the high anti-squat value, which steadily decreases with increasing travel. The anti-rise is relatively constant at just over 50% and thus offers you a balanced characteristic when braking.
As usual with RAAW, well thought-out elements attest to a high level of attention to detail. The frame design gives mud the cold shoulder and is easy to clean. Completely external cable routing simplifies maintenance and allows for quick repairs. Protective rubber elements on the down tube and chainstay as well as on the inside of the right seat stay do their job, as do the extra-long bump stops that allow for different fork offsets and also serve as cable guides. The disc brake mount is a separate component and is designed for 203 mm brake rotors as standard. The special headset and hardware for mounting the shock are already included.

Specifications:

Application:

Downhill

Wheel Size:

29"

Travel:

198 mm

Size:

M, L, XL

Front Triangle Material:

aluminium (6066-T6)

Rear Triangle Material:

aluminium (6066-T6)

Linkage Design:

four-pivot rear frame

Rear Shock:

Fox Racing Shox DHX2 HSC/LSC HSR/LSR Factory

Technical Information:

Wheel Standard:

12 x 157 mm (DH)

Axle Type:

12 mm thru-axle

Seatpost (Ø):

31.6 mm

Seatpost Clamp(Ø):

35 mm

Headset:

ZS56/28.6 - ZS56/30 (top to bottom)

Steerer tube rec.:

1 1/8"

Recommended Fork Axle to Crown:

601.9 mm

Recommended Fork Travel:

203 mm

Bottom Bracket Standard:

BSA

Shell Width:

83 mm

Chainstay Guide:

ISCG 05

Brake Mount:

disc PM8 (direct mount 203 mm)

Front Derailleur Mount:

not possible

Rear Shock Eye-to-Eye Measurement:

225 mm

Rear Shock Stroke:

75 mm

Rear Shock Mounts:

Trunnion Mount

Bottle Cage Mounts:

none

Approved For:

Rotor Size (max.):

220 mm

Tyre Size (max.):

29 x 2.6"

Chainrings:

1x

Chainring Size (max.):

1x 36-tooth

Seatpost Insertion Depth (max.):

140 mm

Adjustment Options:

• Chainstay Length: +/- 5 mm
• Bottom Bracket Height: +/- 3 mm
• Progression: 22% / 25% / 28%
• Reach: +/- 5 mm
• Head Tube Angle: +/- 1°

Features:

• downhill frame with various adjustment options complemented by Fox DHX2 Factory steel coil shocks
• Fox shock including coil with adjustable high- and low-speed compression damping and rebound
• adjustable chainstay length through exchangeable inserts and thru-axle
• adjustable bottom bracket height and progression by changing the lower shock mount
• adjustable reach and head tube angle through exchange of headset cups
• as little surface area as possible for mud to adhere to
• easy to clean due to well thought-out design
• ball-bearing shock mount for sensitive response behaviour
• low maintenance thanks to completely sealed pivot points
• completely external cable routing for easy maintenance
• long bump stop with integrated cable guide allows for different fork offsets
• replaceable brake mount
• stiff rear thru-axle connection prevents twisting and is extremely stable
• overall low bottom bracket for central position in the bike
• with rubber protectors on down tube and chainstay
• screw mounts at the bottom of the down tube for tool bag
• optimised for 34-tooth chainring
• 35 - 50 mm recommended stem length
• 165 mm recommended crank length
• 52 mm recommended fork offset

Geometry:

(based on a fork axle to crown length of 601.9 mm, medium bottom bracket height, medium head tube angle and medium reach)
M:

Recommended Height:

167 - 180 cm

Stack:

639.9 mm

Reach:

455 mm

Seat Tube Length:

400 mm

Head Tube Length:

110 mm

Chainstay Length:

440 - 450 mm

Wheelbase:

1270.1 mm

Bottom Bracket Height:

345 mm

BB Drop:

26.5 mm

Seat Tube Angle (effective):

78°

Seat Angle (real):

63.7°

Head Tube Angle:

63°

L:

Recommended Height:

177 - 190 cm

Stack:

639.9 mm

Reach:

480 mm

Seat Tube Length:

400 mm

Head Tube Length:

110 mm

Chainstay Length:

445 - 455 mm

Wheelbase:

1300.1 mm

Bottom Bracket Height:

345 mm

BB Drop:

26.5 mm

Seat Tube Angle (effective):

78°

Seat Angle (real):

63.7°

Head Tube Angle:

63°

XL:

Recommended Height:

185 - 199 cm

Stack:

639.9 mm

Reach:

505 mm

Seat Tube Length:

400 mm

Head Tube Length:

110 mm

Chainstay Length:

450 - 460 mm

Wheelbase:

1330.1 mm

Bottom Bracket Height:

345 mm

BB Drop:

26.5 mm

Seat Tube Angle (effective):

78°

Seat Angle (real):

63.7°

Head Tube Angle:

63°

Models:

The recommended rider weight applies in full riding gear, i.e. including clothing, backpacks and any protectors. It serves as a guide for choosing the correct suspension stiffness, taking into account the progression.

350 lbs:

Spring Rate:

350 lbs/inch

Recommended Rider Weight:

67 - 77 kg (28%)

400 lbs:

Spring Rate:

400 lbs/inch

Recommended Rider Weight:

67 - 77 kg (25%), 81 - 91 kg (28%)

450 lbs:

Spring Rate:

450 lbs/inch

Recommended Rider Weight:

81 - 88 kg (25%), 95 - 100 kg (28%), 67 - 74 kg (22%)

500 lbs:

Spring Rate:

500 lbs/inch

Recommended Rider Weight:

91 - 100 kg (25%), 104 - 116 kg (28%), 77 - 85 kg (22%)

550 lbs:

Spring Rate:

550 lbs/inch

Recommended Rider Weight:

104 - 110 kg (25%), 122 kg (28%), 88 - 91 kg (22%)

Shipping Notice:

The shock is not pre-assembled. Appropriate hardware is included.

Contents:

• 1 x RAAW Mountain Bikes Yalla! frame
• 1 x Fox Racing Shox DHX2 HSC/LSC HSR/LSR Factory shock (not pre-assembled)
• 1 x Fox Racing Shox SLS coil
• 1 x RAAW Mountain Bikes ZS56/28.6 - ZS56/30 headset
• 1 x RAAW Mountain Bikes thru-axle
• 1 x RAAW Mountain Bikes seatpost clamp
• 1 x RAAW Mountain Bikes PM8 disc brake adapter
• 1 x RAAW Mountain Bikes rear shock axle
• 2 x RAAW Mountain Bikes rear shock spacer
• 2 x RAAW Mountain Bikes threaded bolts
• 1 x RAAW Mountain Bikes cable guide
• 1 x RAAW Mountain Bikes protective film kit

Order Together:

Optional accessories:

• Thru-Axle Set for adjusting the chainstay length
• Lower Shock Mount for adjusting bottom bracket height and progression
• Headset Cups for adjusting reach and head tube angle