Shimano Nexus SG-C6011-8V/8R Internally Geared Hub

Shimano Nexus internally geared hub SG-C6011-8V/8R - for V-brakes or roller brakes

The Shimano Nexus SG-C6011-8V/8R internally geared hub is an 8-speed internally geared hub suitable for V-brakes or, after removing the dust cap, roller brakes. It has an overall gear ratio of over 300 percent (Inter-8) and closely spaced gears for a smooth, comfortable cadence. The built-in shift servo and the power modulator help with the use.

Guidelines for Replacing E-bike Components:

Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance.

Specifications:

Series:

Nexus C6000

Application:

City & Touring

Gears:

8-speed

Brake Type:

V-brake, roller brake (after removing the dust cap)

Axle Type:

10 mm bolt-on axle

Over Locknut Dimension:

132 mm

Spoke Hole Count:

36 hole

Technical Information:

Range:

307 %

Material:

Aluminium

Technology:

Inter-8

Axle Length:

184 mm

Spoke Size:

13 gauge (2.3 mm) / 14 gauge (2.0 mm)

Pitch Circle Diameter:

92.6 mm

Flange Diameter:

105.2 mm

Flange Width:

3.2 mm right, 3.2 mm left

Flange Distance:

58.3 mm

Offset:

2.7 mm

Compatibility:

Small Parts Set:

SM-8S31

Shifting Unit:

CJ-8S20 / CJ-8S40

Resistance Unit:

V-brake, roller brake

Dropouts:

horizontal without derailleur hanger, standard type without derailleur hanger, adjustable, vertical with derailleur hanger

Chain Tensioner (for vertical dropouts):

CT-S510

Sprocket:

SM-GEAR

Crank:

FC-C6000, FC-S501 with single chain guard

Chain:

CN-NX10 (1/2 x 1/8" ), HG 8-speed (1/2 x 3/32" )

E-Bike:

EP8 EP801, EP8 EP800 for Urban / Touring, EP6 for Urban / Touring, STEPS E6100, E6180, E5000, E5080

Features:

• optimised overall riding comfort and efficiency
• higher shifting capacity even with the high chain tension typical for e-bike motors
• optimisation: suitable for both e-bikes and conventional bicycles
• low normal alignment
• silent freehub
• shift servo
• shift power modulator
• high efficiency
• painted
• with left dust cap

Technology:

Inter-8
Shimano 8-speed gear hubs with Inter-8 technology have a total gear ratio of over 300 percent. Due to the close gradation of the gears, they enable a smooth, efficient cadence and thus greater comfort while riding.

Gear Change Support
Gear Change Support is a shift servo technology on Shimano gear hubs. It ensures that you can downshift quickly, precisely and without using a lot of force, as it uses part of the pedal force for this process. The pedal force acts against the shift cylinder to overcome its counterpressure and execute the gear change. The shifting force is thus reduced by 40 %.

Manufacturer Numbers:

silver:

K-SGC60118VAS

black:

K-SGC60118VAL

Contents:

• 1 x Shimano Nexus SG-C6011-8V internally geared hub with dust cap