CeramicSpeed Coated Derailleur Pulleys for SRAM Eagle 1x12-speed 14 tooth

Item number: 76324
301.68€

excl. shipping cost
to the delivery destination: USA

Availability:
Choose model
Quantity:

Delivery to USA is not possible.

No picture available for the chosen product version.

CeramicSpeed Coated Derailleur Pulleys for SRAM Eagle 1x12-speed 14 tooth - gold/universal
CeramicSpeed Coated Derailleur Pulleys for SRAM Eagle 1x12-speed 14 tooth - black/universal
CeramicSpeed Coated Derailleur Pulleys for SRAM Eagle 1x12-speed 14 tooth - black/universal
CeramicSpeed Coated Derailleur Pulleys for SRAM Eagle 1x12-speed 14 tooth - black/universal
  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.84 / 5.00
The CeramicSpeed Coated derailleur pulleys for SRAM Eagle 1x12-speed have 14 teeth with narrow-wide-design and are based on smooth, resilient and highly efficient ceramic bearings. In addition, the bearing races of the bearings were coated with metal.

Technical Information:


Application: Cross Country, Enduro, All Mountain
Compatibility: SRAM Eagle
Teeth: 14
Gearing: 12-speed
Material: aluminium
Bearings: 626 ceramic

Compatibility:


- SRAM Eagle 1x12-speed mechanical
- SRAM Eagle 1x12-speed AXS

Features:


- high-performance bearings with special ceramic balls made of 3rd degree silicon nitride (best achievable degree for ceramic bearings)
- CeramicSpeed bearing balls: 15 % harder, 100 % smoother and 99 % more resilient than commercially available ceramic balls
- ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel
- additional metal-coated race for more performance and durability
- energy savings thanks to greatly reduced friction, higher top speed thanks to improved power transfer
- 14 teeth with narrow-width profile
- handmade in Denmark

Technology:


Ceramic Bearings by CeramicSpeed
CeramicSpeed ceramic balls are rounder, harder, smoother, lighter and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimetre. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimised power transfer and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes!

Coated
CeramicSpeed Coated products offer the ultimate in performance and durability. This is achieved by a unique coating that increases the hardness of the races, so that in combination with the smoothness of CeramicSpeed ball bearings, there is virtually no bearing wear. The coating is a metal layer which is 75 % harder than hardened steel. It is applied very thinly (0.003 mm) and evenly over the entire surface of the race and is used both internally and externally for optimum results.

Manufacturer Part Numbers:


black: 103346
gold: 103347

Contents:


- 1 x CeramicSpeed SRAM Eagle Coated lower derailleur pulley
- 1 x CeramicSpeed SRAM Eagle Coated upper derailleur pulley
- 1 x CeramicSpeed oil, 15 ml dropper bottle
- 1 x CeramicSpeed grease, 5 ml syringe
- 1 x sticker sheet


Models:

in stock 2 to 7 days up to 10 days Out of stock inform me
  • black/universal
    301.68€
  • gold/universal
    301.68€

Rate this product

Be the first and leave your opinion!

You have questions regarding a product?

+49 2405.450045 +49 2405.450045

Customer Reviews

no reviews yet
5
0
4
0
3
0
2
0
1
0

Your opinion counts!

Be the first and leave a comment!