Item number: 47411
  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.89 / 5.00

The patch set for tubeless tyres in a practical package: the Basic Tube Tubeless Repair Patch Set by MaXalami

Now the Maxalami patch set packed in a plastic cylinder with a loop can be conveniently carried in or on your backpack, so you always have it handy without having to search for it for a long time.

The idea for this product came to seven-time German MTB marathon champion Max Friedrich during one of his stays in South Africa, where he saw a similar system. However, this did not meet the high standards of the engineer and racer. This is why he decided to launch his own brand in Europe. Since you sometimes have to apply a lot of force during assembly, the tool of the MaXalami set is stronger. The patches can be cut to size and close even large holes.

The MaXalami patch kit repairs tubeless tyre damage directly on the trail in seconds, without removing the tyre. Treat the damaged area with a cleaning tool as required. Then the MaXalami is pressed directly into the tyre hole with the help of the installation tool. It seals cuts up to 10 mm without any further aids. After removing the insertion tool, simply pump up the air, check for leaks and off you go!

Technical Information:

tubeless tyres
Size (LxW):
100 mm x 3.5 mm
flexible, portionable


1. Clean the hole with a cleaning tool if necessary
2. Shorten MaXalami strips to 5 cm
3. Thread the MaXalami into the insertion tool
4. Pre-prepared insertion tool
5. Insert the tool tip in the hole
6. Press through until just before the patch end
7. Hold the MaXalami firmly and pull out the insertion tool again
8. Turn the repaired parts downwards so that the sealing milk can combine with MaXalami
9. Done!

Tip for Racers:
  • With larger holes, several MaXalamis can also be used, or you can simply stuff the ends into the hole again or turn the tool during the entire insertion process.
  • Use the MaXalami untrimmed (10 cm). This way you no longer need to pay attention to how far you insert the tool. Saves a few seconds.
  • Simply push it in until contact!


  • 3 x MaXalami patches (3.5 mm)
  • 1 x inserting tool
  • 1 x plastic cylinder
  • not incl. cleaning tool


  • universal/universal, in stock

Customer Reviews (16)


Customer Reviews (16)


Give us your opinion on this product.

by Vinay R.  on 30.09.2022
verified purchase

Quite happy about this one. Isn't too finicky, just a proper size for when you're already wet, tired and not eager to waste too much time plugging your tire. The cap is such that you can slide it up your steerer (cap facing down) and it stays put. At least it works for me (1 1/8" to 1 1/2" tapered steerer, Magura TS8 fork).

Is this review helpful?
by Arto I.  on 19.06.2018
verified purchase

Cheap, light and works like a charm! Wurst is a bit too sticky but works really well.

Is this review helpful?
by Timo O.  on 03.06.2018
verified purchase

Does the expected, pretty basic. Very few bacon slices though.

Is this review helpful?
by Максим Б.  on 08.04.2017
verified purchase

Works great.

Is this review helpful?
by Alexander V.  on 18.06.2016
verified purchase
2 of 5 customers found this review helpful.

Looks very cheap. And it's overpriced

Is this review helpful?

Give us your opinion on this product.