Praxis Works M24 BSA Bottom Bracket

For GXP axles: the M24 BSA bottom bracket from Praxis Works

With the Praxis Works M24 bottom bracket you can install a Praxis M24, Oval Concepts M24 or SRAM GXP crank with steel axle on a BSA 68/73 mm road or MTB frame. At the drive end there is a 24 mm bearing, at the non-drive end a 22 mm bearing. These are cartridge bearings made of steel.

Specifications:

Application:

Road, Cross Country

Series:

M24

Type:

BSA

Shell Width:

68 mm, 73 mm

Axle Diameter:

24 mm (GXP)

Technical Information:

Bearings:

steel

Compatibility:

• 68 mm BSA Road frame, 68 mm and 73 mm BSA MTB frame
• for all Praxis works M24 cranks, Oval Concepts M24 cranks and SRAM GXP cranks w/ steel axles
• for braze-on, clamp and direct mount front derailleurs, E-type only on 68 mm MTB frames
• bottom bracket tool with 16 teeth and 44 mm inner diameter required

Features:

• 24 mm bearing on the drive side, 22 mm bearing on the non-drive side
• cartridge bearings

Manufacturer Number:

68-0301

Contents:

• 1 x Praxis Works M24 BSA left bearing cup, incl. bearings
• 1 x Praxis Works M24 BSA right bearing cup, incl. bearings
• 1 x Praxis Works BSA bottom bracket sleeve
• 1 x 24 mm x 2 mm dust cap for drive side
• 1 x 24 mm x 3.7 mm dust cap for drive side
• 1 x wave washer for drive side
• 1 x 22 mm x 1.7 mm dust cap for non-drive side
• 1 x spacer

JBS GmbH & Co. KG
Ernst-Abbe-Straße 28
52249 Eschweiler
Germany
info@jbs-trading.de