RAAW Mountain Bikes Jibb 29" Frameset w/ Fox Float X2 2POS Factory - raw matte/L

RAAW Mountain Bikes Jibb 29" Frameset w/ Fox Float X2 2POS Factory

Item number: 88521

The RAAW Mountain Bikes Jibb 29" Frameset with Fox Float X2 Factory Air Shock - A well thought-out design for fun rides


This RAAW Mountain Bikes Jibb frameset for 29" is combined with a Float X2 Factory air shock from Fox Racing Shox and is a playful companion on all-mountain and enduro trails. The Float X2 Factory 2POS shock with Kashima Coat is precisely tunable and offers compression and rebound adjustment in the high- and low-speed range. The Firm Mode of the 2-position lever enables even more efficient climbing uphill if required. As with the Madonna V2.2, RAAW now also use their own thru-axle system for the Jibb, which increases the stiffness and prevents the axle from loosening while riding. The frame design supports an active riding style, giving you confidence and control. The balanced geometry allows for a centralised riding position and provides sufficient traction. The same attention to detail is evident on the Jibb as on its sibling, the Madonna. For example, the brake mount on the Jibb is also a separate component. This means you don't need any extra adapters for different brake rotor sizes, and precision alignment of the brake caliper is not an issue. You can attach an accessory bag (not included) for tools and equipment to two threaded holes on the top tube, which lets you keep your most important items handy at all times. The required shock hardware is already included, so you don't need any bushings for assembly. A thru-axle, headset, seatpost clamp and protective film kit equips you with the basics for your set-up.

Note: The rear shock is not pre-assembled.


Specifications:

Application:
All Mountain, Enduro
Wheel Size:
29"
Travel:
135 mm
Size:
S, M, L, XL
Front Triangle Material:
aluminium (6066-T6)
Rear Triangle Material:
aluminium (6066-T6)
Linkage Design:
four-pivot rear frame
Rear Shock:
Fox Racing Shox Float X2 2POS Factory

Technical Information:

Rear Over Locknut Dimension:
12 x 148 mm (Boost)
Axle Type:
12 mm thru-axle
Seatpost (Ø):
31.6 mm
Seatpost Clamp(Ø):
35 mm
Headset:
ZS44 - ZS56 (top to bottom)
Recommended Steerer Tube:
1 1/8" - 1.5" tapered
Recommended Fork Axle to Crown:
560 mm
Recommended Fork Travel:
150 - 160 mm
Bottom Bracket Standard:
BSA
Shell Width:
73 mm
Chainstay Guide:
ISCG05
Brake Mount:
Disc PM8
Front Derailleur Mount:
not possible
Rear Shock Eye-to-Eye Measurement:
185 mm
Rear Shock Stroke:
55 mm
Rear Shock Mounts:
Trunnion
Bottle Cage Mounts:
1

Approved For:

Weight Limit:
130 kg total weight
Rotor Size (max.):
203 mm
Tyre Size (max.):
29 x 2.6"
Chainrings:
1x
Chainring Size (max.):
1x 36-tooth
Fork Axle to Crown Size (max.):
576 mm

Features:

  • sensitive, smooth suspension due to high transmission ratio at the beginning of the spring travel and use of cartridge bearings
  • evenly decreasing transmission ratio with approx. 15 % progression at the end of the suspension travel
  • low maintenance thanks to completely sealed pivot points
  • dirt-resistant frame design
  • ample tyre clearance
  • suspension fork with 44 mm offset recommended
  • maximum insertion depth for seatposts 205 mm (S), 230 mm (M), 255 mm (L), 280 mm (XL)
  • externally routed cables for easy maintenance without chafing or rattling
  • internal cable routing for seatpost in the seat tube possible
  • exchangeable brake mount with disc brake adapter for 180 mm also enables installation of a 180 mm brake rotor
  • adjustment of the chainstay length possible with inserts for the dropouts
  • two threads on the top tube for attaching accessory bags or items such as a Wolf Tooth Components B-RAD Mini Strap Mount accessory holder

Geometry:

(based on a fork axle to crown length of 560 mm)
S:
Recommended Height:
158 - 170 cm
Stack:
608 mm
Reach:
420 mm
Seat Tube Length:
395 mm
Effective Top Tube Length:
561 mm
Head Tube Length:
100 mm
Chainstay Length:
440 mm
Wheelbase:
1172 mm
Bottom Bracket Height:
335 - 340 mm
BB Drop:
35 mm
Seat Tube Angle (effective):
74.5°
Seat Tube Angle (virtual):
77.5°
Head Tube Angle:
65.5°

M:
Recommended Height:
167 - 180 cm
Stack:
622 mm
Reach:
445 mm
Seat Tube Length:
420 mm
Effective Top Tube Length:
589 mm
Head Tube Length:
115 mm
Chainstay Length:
440 mm
Wheelbase:
1203 mm
Bottom Bracket Height:
335 - 340 mm
BB Drop:
35 mm
Seat Tube Angle (effective):
74.5°
Seat Tube Angle (virtual):
77.5°
Head Tube Angle:
65.5°

L:
Recommended Height:
177 - 190 cm
Stack:
636 mm
Reach:
470 mm
Seat Tube Length:
445 mm
Effective Top Tube Length:
619 mm
Head Tube Length:
130 mm
Chainstay Length:
445 mm
Wheelbase:
1240 mm
Bottom Bracket Height:
335 - 340 mm
BB Drop:
35 mm
Seat Tube Angle (effective):
74.5°
Seat Tube Angle (virtual):
77.5°
Head Tube Angle:
65.5°

XL:
Recommended Height:
186 - 199 cm
Stack:
649 mm
Reach:
495 mm
Seat Tube Length:
470 mm
Effective Top Tube Length:
648 mm
Head Tube Length:
145 mm
Chainstay Length:
450 mm
Wheelbase:
1276 mm
Bottom Bracket Height:
335 - 340 mm
BB Drop:
35 mm
Seat Tube Angle (effective):
74.5°
Seat Tube Angle (virtual):
77.5°
Head Tube Angle:
65.5°

Contents:

  • 1 x RAAW Mountain Bikes Jibb Frame
  • 1 x Fox Racing Shox X2 2POS Factory rear shock (not pre-assembled)
  • 1 x RAAW Mountain Bikes thru-axle
  • 1 x Acros headset
  • 1 x RAAW Mountain Bikes seatpost clamp
  • 1 x RAAW Mountain Bikes PM8 disc brake adapter
  • 2 x RAAW Mountain Bikes rear shock spacer
  • 1 x RAAW Mountain Bikes rear shock axle
  • 1 x protective film kit, matt
  • 11 x zip ties
  • 1 x sticker

  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.89 / 5.00

Models:

  • raw matte/L, in stock
    1,376.22€
  • raw matte/XL, in stock
    1,376.22€
  • matte black/L, in stock
    1,376.22€
  • matte black/XL, in stock
    1,376.22€

Rate this product

Be the first and leave your opinion!

Customer Reviews

no reviews yet
5
0
4
0
3
0
2
0
1
0

Your opinion counts!

Be the first and leave a comment!