Stages SRAM GXP MTB Power L Power Meter Carbon Crank Arm

Item number: 65429
419.33€

excl. shipping cost
to the delivery destination: USA

carbon/175.0 mm
Availability:
Out of stock
Quantity:

Delivery to USA is not possible.

No picture available for the chosen product version.

Out of stock
Stages SRAM GXP MTB Power L Power Meter Carbon Crank Arm - carbon/175.0 mm
Stages SRAM GXP MTB Power L Power Meter Carbon Crank Arm - carbon/175.0 mm
Stages SRAM GXP MTB Power L Power Meter Carbon Crank Arm - carbon/175.0 mm
  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.84 / 5.00
Due to unknown delivery times, certain varieties of this article are currently not available. More information about the current situation

A plus in measuring accuracy: the Power L Carbon SRAM GXP MTB Powermeter from Stages


The Stages Power L Powermeter is pre-mounted on a left Stages Power carbon crank arm and is suitable for all frames compatible with GXP cranks. It enables left-sided power measurement, and Like all Stages power meters, it features Active Temperature Compensation (ATC) technology, which ensures consistent measurement. Measuring accuracy is +1.5/-1.5 %, and measuring sensors add only 15 g in overall weight.
When you combine Stages Power L with the Stages LINK training platform and a Stages Dash cycling computer, it provides you with additional data to achieve maximum performance, just like the pros do. The Stages Power L power meter is not only compatible with the Stages Dash, but also with any third-party bike computer as long as it can display performance data and works with ANT+ or Bluetooth.

Information regarding the return of batteries and electrical equipment:


Information on the return and disposal of used batteries, accumulators and electrical equipment can be found here.

Specifications:


Application: Cross Country
Type: crankarm with performance measurement (left)
Compatibility: 1-speed

Technical Information:


Crankarm Material: carbon
Crankarm Length: 170.0 mm, 175.0 mm
Axle Diameter: 24 mm (GXP)
Recommended Bottom Bracket: SRAM GXP (ordered separately)
Tolerance: +/-1.5 percent
Point of Measurement: crankarm
Power Source: CR2032 button cell
Battery Life: min. 200 hours
Data Collected: cadence (20-220 UpM), power (0-2500 W), torque
Waterproof: IPX7
Data Transfer: ANT+, Bluetooth

Compatibility:


- compatible with SRAM GXP MTB drive sides with 168 mm Q-factor (not 156 mm Q-factor)
- compatible with most frame models, see Stages Support website
- compatible software: Stages Link, Training Peaks, Strava, Garmin Training Center etc.

Features:


- left side power measurement (sensor on left crankarm)
- flat design with robust connection between battery cover and housing
- battery service by user: tool-free battery change
- active temperature compensation
- built-in cadence sensors, no magnet necessary
- integrated LED display displays battery status and calibration result
- improved acceleration sensor and additionally integrated ring laser for improved cadence resolution
- wireless firmware update via Stages App
- Near Field Communication (NFC) with Tap-To-Pair for easy connection to many smartphones and other devices
- improved Bluetooth and ANT+ antennas increase data transmission strength by a factor of 6
- additional weight only 15 g

Technology:


Stages Powermeter
No moving parts and all packed under an extremely stable ABS-PC case - the Stages power meter does not damage the structure and therefore the stability of the crankarm. It adds the ability to measure power to the crank.
Power is the measurement of the mechanical work you do on the bike and the most accurate way to measure your effort. In contrast to heart rate, which is highly dependent on physiological influences such as stress, lack of sleep, caffeine, ambient temperature, time of day, fluid balance and other factors, performance shows exactly how much work you do and how effective your training is. Performance measurement is the perfect tool to understand what progress you make during training, but also how performance levels and fatigue develop. Simply put - if you want to know how in shape you are, test your power.
The cadence and torque data acquired (see below) are multiplied to determine the power of one pedal revolution.

Torque Measurement
In order to measure the torque, strain gauges specially developed by Stages are applied precisely along the crankarm. Strain gauges, which are also used in a similar form in space travel, can detect the smallest of bends even in the stiffest crank. Each pedal revolution causes a minimal bend along the crankarm. This downwards directed force occurs at each revolution. Multiplying this force by 9.8 m/s2 and the length of the crankarm gives the force applied per pedal revolution - this is the torque.

Cadence Measurement
The Stages power meter measures cadence using an accelerometer (same technology that allows smartphones to adjust the display depending on position). The accelerometer is part of the specially designed electronic circuit board, eliminating the need for outdated magnets, external sensors and cable ties to measure cadence. This state-of-the-art technology also allows the power meter to detect the position of the crank several times per revolution. This results in faster information transfer and better performance data.

Active Temperature Compensation (ATC)
Stage power meters are equipped with active temperature compensation (ATC). Different temperatures cause strain gauges to expand or contract by a certain amount. ATC allows the power meter to compensate for temperature changes that would otherwise affect the strain gages and their ability to accurately measure forces. The most important thing is that Stages ATC works automatically and continuously while riding - so you don't have to stop pedalling.

ANT+ / Bluetooth Transmission
The Stages power meter was the first power meter on the market to use Bluetooth smart transmission in addition to ANT+.
Bluetooth:
- enables bidirectional communication between the Stages power meter and a smartphone or Bluetooth enabled bike computer
- sends more data per second to end devices compared to ANT+
- makes every Stages power meter fit for the future, as updates are possible wirelessly
- no need for cables or external ports - simply update your firmware from your smartphone
- load training sessions from your smartphone easily and directly to Strava or TrainingPeaks.
ANT+:
ANT+ is the gold standard for wireless communication in the cycling and fitness industry. The system is simple, robust and allows cyclists to add performance measurement to the ANT+ enabled bike computer.

StagesPower App
Make your power meter fit for the future. The data recorded by your Stages power meter can be transferred directly to the StagesPower App. Use the app to update your firmware and have access to innovations. Check if new firmware versions are available. Perform a zero point calibration of the power meter using the app. Track power and cadence. Observe the battery level of the power meter. In addition, high-speed data recording is available, which impressively demonstrates the sensitivity of the Stages power meter and enables scientific data acquisition.

Stages Link
Stages Link offers cyclists at all levels of performance individual coaching and knowledge transfer tailored to the needs of each athlete. As a desktop application or app, Stages Link is the hub of cloud-based coaching, knowledge platform, training analysis and a tool for maintaining your training equipment, developed in close collaboration with Today's Plan analysis specialists. Stages Link customises training plans down to individual training units to optimise the performance of athletes and enable them to achieve their goals. Stages Link also helps you quickly set up your Stages Dash bike computer and check your Stages power meter, but is also compatible with devices from other manufacturers. You will receive access to Stages Link for two months free when you purchase a &keywords= Stages Dash computer. Access to basic functions is always free.

Manufacturer Part Numbers:


170.0 mm: GXML-C
175.0 mm: GXML-E

Contents:


Stages Power L carbon SRAM GXP MTB, consisting of:
- 1 x Stages SRAM GXP MTB Carbon left crankarm with power meter
- 1 x CR2032 batteries


Models:

in stock 2 to 7 days up to 10 days Out of stock inform me
  • carbon/175.0 mm
    419.33€

Rate this product

Be the first and leave your opinion!

Customer Reviews

no reviews yet
5
0
4
0
3
0
2
0
1
0

Your opinion counts!

Be the first and leave a comment!