3min19sec Torque Wrench Set, 1-25 Nm

3min19sec 1-25 Nm torque wrench set - reliable tool with excellent price-performance ratio

The 3min19sec torque wrench set consists of a torque wrench with a range from 1 to 25 Nm and many different attachments.
The torque wrench is an inexpensive helper in your workshop and offers you more safety when performing assembly work. You have to set the target torque and tighten the tool until the first crack, then you have reached the right torque.
The most important bits are included so that you can get started straight away. Once your work is done, store them neatly in the box.

Specifications:

Function: driver w/ specified torque
Drive Size: 1/4"
Adjustment Options: 1 - 25 Nm

Technical Information:

Length: 23 cm
Tolerance: ± 6 % of the set value
Direction of Operation: right

Features:

- Torque wrench
- 3 mm hex drive
- 4 mm hex drive
- 5 mm hex drive
- 6 mm hex drive
- 8 mm hex drive
- 10 mm hex drive
- 5 mm hex tool extra long
- Torx T15
- Torx T20
- Torx T25
- Torx T27
- Torx T30
- Torx T40
- PD2 Phillips
- PD3 Phillips
- socket wrench 4 mm
- socket wrench 5 mm
- extension

A note to our customers:
The crackling can be quite quiet at low torques, so pay close attention and also keep an eye on the empty travel at the head. This is because higher torques are transmitted afterwards.
The 3min19sec torque wrench is suitable for right-hand threads. Even though the head has a toggle function, the wrench should only be used to tighten screws within the torque range. This way, it will serve you well for a long time.

What torque should I use?
The proper torque for you components is either printed on the part or in the instructions manual.

Contents:

The 3min19sec 1-25 Nm torque wrench set includes:
- 1 x 3min19sec torque wrench
- 6 x hex key bits
- 1 x hex bit, extra long
- 6 x Torx bits
- 2 x flat head bits
- 2 x sockets
- 1 x extension
- 1 x case