Look Kéo Classic 3 Clipless Pedals

Thanks to the composite body and optimised joints, the Kéo Classic 3 is one of the lightest pedals in its category. The large contact surface enables a high level of pedalling comfort.

Specifications:

Application:

Road, beginner to advanced

Type:

clipless pedals

Pedal System:

Look Road

Technical Information:

Body Material:

composite

Axle Material:

Chromoly

Bearings:

2x, 1 ball bearing, 1 needle bearing

Height:

15.7 mm

Contact Surface:

400 mm2

Release Angle:

0°, 4.5° or 9°, depending on cleats

Release Force:

8 to 12 Nm

Recommended Cleats:

Kéo Grip Cleats

Pedal Centre to Crank Arm Distance:

53 mm (expandable to 55 mm)

Approved For:

Weight Limit:

100 kg total weight

Features:

Setting the Q-factor
Thanks to its 14 mm thread, the new Look axle allows an adjustment of the Q-factor of 2 mm with the help of a specific intermediate washer, which is available as an individual part. A change from 53 to 55 mm is thus made possible.

Chromoly axle line for optimum reliability
An oversize axle made of steel is used for the axle line on the Kéo Classic 3. It consists of a mini ball bearing (12 mm inside x 18 mm outside) and a needle bearing. A new spacer was positioned so that the bearing and needle are firmly seated. In this way, friction is reduced to a minimum and turns become smoother. Thanks to a new control mechanism when pressing the axle line into the body, these pedals are absolutely reliable. Look axles are only released after a rotation test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (one bump at each revolution). This test far exceeds the current EN14781 standard.

Adjustable Tension
The spring tension setting options range from 8 to 12 Nm, so that all users (from beginners to very experienced users) can choose the setting that best suits their discipline.

Contents:

• 1 x pair Look Kéo Classic 3 Clipless Pedals
• 1 x pair Look Kéo Grip grey cleats