Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork

Item number: 74980
797.48€

excl. shipping cost
to the delivery destination: USA

Availability:
Choose model
Quantity:

Delivery to USA is not possible.

Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - gloss red/170 mm / 1.5 tapered / 15 x 110 mm / 44 mm
Marzocchi Bomber Z1 Coil 29" Boost Suspension Fork - gloss red/170 mm / 1.5 tapered / 15 x 110 mm / 44 mm
  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.9 / 5.00

The Bomber Z1 Coil 29" Boost suspension fork by Marzocchi offers legendary ride quality in a modern chassis


With the Bomber Z1 Coil, Marzocchi offers a suspension fork with a specially hardened, super-light silicon-chromium steel spring. The preload of the spring is done by the top cap and is purely there to adapt the sag (negative spring travel) to the rider's weight, but has no influence on the spring rate. In addition to the typical M-crown design, the fork offers a stanchion tube diameter of 36 mm, a travel of 150 mm to 170 mm and Grip damping with adjustable compression and rebound. All forks are delivered with a medium coil.

Specifications:


Application: All Mountain, Enduro
Wheel Size: 29"
Suspension Type: steel coil
Travel: 160 mm, 170 mm
Steerer Tube: 1 1/8" - 1.5" tapered
Axle Type: thru-axle with quick release lever (15 x 110 mm)
Brake Mount: disc PM 7" (direct mount 180 mm)

Technical Information:


Offset: 44 mm
Steerer Tube Length: 263 mm
Steerer Tube Diameter (Stem): 28.6 mm
Steerer Tube Diameter (Crown Race): 40 mm
Axle to Crown: 567.1 mm (160 mm), 577.1 mm (170 mm)
Over Locknut Dimension: 110 mm
Stanchion Tube Diameter: 36 mm
Steerer Tube Material: aluminium
Crown Material: aluminium
Stanchion Tube Material: aluminium
Lower Tube Material: magnesium
Dropout Material: aluminium

Adjustment Options:


Compression: 2-position Sweep Adjust (Open, Firm)
Rebound: yes
Suspension Stiffness: steel coil adjust
Remote: no
Travel Adjustment: no

Approved For:


Tyre Size (max.): 29 x 2.5" , 27.5 x 3.0"
Note: From a tyre size of 29 x 2.5" or 27.5 x 3.0" the tyre clearance must be checked with the fork fully compressed. It should be at least 8 mm measured from the fork crown.
Rotor Size (max.): 203 mm

Features:


- Grip Sweep damping with adjustable rebound and infinitely adjustable low-speed compression stage
- specially hardened, super-light silicon-chromium steel spring
- Air Assist system for progressive characteristic and breakdown protection
- spring preload via top cap
- complex spring guidance system for noiseless springs
- black anodised stanchion tubes
- all forks are delivered with a medium coil

Technology:


Grip:
Inspired by motocross technology, the Grip damper cartridge works with a spring-loaded, independently operating floating piston. Grip technology allows excess damping oil to flow through ports at the top of the damper, ensuring even damping and increasing durability.

Models:


matte black / 160 mm / 1.5" tapered / 15 x 110 mm / 44 mm:
- Travel: 160 mm
- Steerer Tube: 1 1/8" - 1.5" tapered
- Offset: 44 mm
- Brake Mount: Disc PM 7" (direct mount 180 mm)
- Axle Type: thru-axle with quick release lever (15 x 110 mm)
- Manufacturer Part Number: 912-01-096

gloss red / 170 mm / 1.5" tapered / 15 x 110 mm / 44 mm:
- Travel: 170 mm
- Steerer Tube: 1 1/8" - 1.5" tapered
- Offset: 44 mm
- Brake Mount: Disc PM 7" (direct mount 180 mm)
- Axle Type: thru-axle with quick release lever (15 x 110 mm)
- Manufacturer Part Number: 912-01-097

matte black / 170 mm / 1.5" tapered / 15 x 110 mm / 44 mm:
- Travel: 170 mm
- Steerer Tube: 1 1/8" - 1.5" tapered
- Offset: 44 mm
- Brake Mount: Disc PM 7" (direct mount 180 mm)
- Axle Type: thru-axle with quick release lever (15 x 110 mm)
- Manufacturer Part Number: 912-01-091

Contents:


- 1 x Marzocchi Bomber Z1 suspension fork
- 1 x Marzocchi 15 x 110 mm thru-axle
- 1 x star nut
- 3 x volume spacer

Gewicht:


-gloss red / 170 mm / 1.5 tapered / 15 x 110 mm / 44 mm : 2525 g

Models:

in stock 2 to 7 days up to 10 days up to 20 days
  • gloss red/170 mm / 1.5 tapered / 15 x 110 mm / 44 mm
    797.48€
  • matte black/160 mm / 1.5 tapered / 15 x 110 mm / 44 mm
    797.48€
  • matte black/170 mm / 1.5 tapered / 15 x 110 mm / 44 mm
    797.48€

Rate this product

Be the first and leave your opinion!

You have questions regarding a product?

+49 2405.450045 +49 2405.450045

Customer Reviews

no reviews yet
5
0
4
0
3
0
2
0
1
0

Your opinion counts!

Be the first and leave a comment!