- 100 day return period
- Online since 1998
- Trusted Shop 4.89 / 5.00
Maintenance Oil for 3- to 8-speed gear hubs by Shimano - For maintaining internally geared hubs
Shimano maintenance oil lets you perform a proper oil change on 3-, 5-, 7- and 8-speed internally geared hubs. To do this, submerge the inner gear unit right side down to the first sprocket and hold it in the oil for 90 seconds. Then drain the excess oil for about 1 minute. This maintenance oil is reusable. However, it must not be used to treat Shimano 11-speed internally geared hubs; a special oil is available for them.
- Internal Hub Maintenance Oil
- Oil change
- Shimano 3-speed gear hubs
- Shimano 5-speed gear hubs
- Shimano 7-speed gear hubs
- Shimano 8-speed gear hubs
- oil change and cleaning of the gear unit
- also available as service set with dip tank
- Signal Word:
Hazardous Components:Refined mineral oils 90 - 99 %, additive 1 - 9 %, dye (blue) < 0.1 %
Hazard Warnings:H304 May be fatal if swallowed and enters airways.
Safety Information:P202 Do not handle until all safety precautions have been read and understood.
P210 Keep away from heat, hot surfaces, sparks, naked flames and other sources of ignition. No smoking.
P242 Use non-sparking tools.
P260 Do not breathe dust / smoke / gas / mist / vapour / aerosol.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P264 Wash hands thoroughly after handling.
Manufacturer:SHIMANO EUROPE B.V.
High Tech Campus 92
5656 AG Eindhoven
Emergency Telephone Number: +31-341-272222
Models:Canister, 1 litres:
- Nominal Amount:
- 1 litres
- Packaging Type:
- Manufacturer Number:
- 1 x maintenance oil for 3-/5-/7-/8-speed internally geared hubs