Specialized Enduro Expert Carbon 29" Mountain Bike

The Enduro Expert 29" mountain bike by Specialized - more powerful and faster than ever before

The Specialized Enduro Expert is a carbon bike with downhill DNA, equipped with SRAM X01 Eagle 1x12-speed gears, Code RS brakes and a Fox 38 170 mm suspension fork. It scores with stiffness, speed and directional stability. The low position of the rear shocks and dampers, and the fixed, Flip Chip adjustable suspension ensure precise handling even on steep, rocky trails. Step on the pedal and be amazed how efficiently the bike accelerates. Due to the revised chainstay angle and improved shock linkages, momentum is converted directly into speed without bobbing, both uphill and downhill. A flatter head tube angle, a longer reach and a steeper seat tube also contribute to the Enduro's liveliness. This means you can maintain control on difficult terrain with more confidence than ever.

Specifications:

Application:

Enduro

Wheel Size:

29"

Front Travel:

170 mm

Rear Travel:

170 mm

Sizes:

S2, S3, S4, S5

Front Triangle Material:

carbon (11m)

Rear Triangle Material:

carbon (11m)

Components:

Frame:

Specialized Enduro Carbon, SWAT technology, 12 x 148 mm Boost

Fork:

Fox Racing Shox Float 38 Performance Elite, GRIP2 damping, 44 mm offset, 132 mm trail, 15 x 110 mm Boost

Stem:

Specialized Alloy Trail, 35 mm handlebar clamp

Handlebars:

Specialized Trail, aluminium (7050), 8° backsweep, 6° upsweep, 30 mm rise

Grips:

Deity Knuckleduster

Rear Shock:

Fox Racing Shox Float X2 Performance, Rx Trail Tune, 2-Position Adjust, Low-Speed-Rebound and -Compression Adjust, 205 x 60 mm, Trunnion

Remote System:

none

Seatpost:

OneUp Components Dropper Post V2, 34.9 mm, infinitely adjustable, MMX

Saddle:

Specialized Bridge Comp, hollow CrMo steel struts

Crank:

SRAM Descendant 7K DUB, SRAM DUB BSA 73 mm bottom bracket, 30 T chainring

Pedals:

none

Brakes:

SRAM Code RS, hydraulic disc brake, 4 pistons, 220 mm/200 mm (front/rear)

Shift Lever:

SRAM X01 Eagle Trigger, 12-speed

Rear Derailleur:

SRAM X01 Eagle, 12-speed

Cassette:

SRAM XG-1295, 12-speed, 10-52 t

Chain:

SRAM GX Eagle, 12-speed

Rims:

Roval Traverse 29, aluminium, 30 mm jaw width, handmade, 2Bliss Ready

Spokes:

DT Swiss Competition Race

Front Hub:

Roval, sealed cartridge bearings, 15 x 110 mm thru-axle, 28 holes

Rear Hub:

Roval DT Swiss 370, Ratchet LN, SRAM XD, 12 x 148 mm thru-axle, 28 holes

Front Tyre:

Specialized Butcher, Grid Trail casing, GRIPTON® T9 rubber compound, 2Bliss Ready, 29 x 2.3"

Rear Tyre:

Specialized Eliminator, Grid Trail casing, GRIPTON T7 rubber compound, 29 x 2.3"

Approved For:

Weight Limit:

125 kg (rider + gear)

Rotor Size (max.):

220 mm

Tyre Size (max.):

29 x 2.6" (rear wheel)

Chainrings:

1x

Chainring Size (max.):

1x 36-tooth

Features:

• enduro mountain bike with Fox suspension and SRAM X01 Eagle drivetrain
• control and speed on the most difficult trails
• high pedalling efficiency
• flat, low, extended DH geometry
• SWAT opening in the down tube
• internal cable routing
• flip-chip on the shock eye with low (preset) and high settings for varying the bottom bracket height
• Specialized aluminium seat clamp, 38.6 mm
• standard inner tubes with Presta valves

Technology:

FACT
FACT is an acronym for " Functional Advanced Composite Technology" and summarises all the know-how that Specialized has in the use of carbon fibre. It is a holistic approach, which primarily concerns the bike frames, but is found in many components such as handlebars, stems, saddles etc. The starting point is always the awareness for the needs of riders and the capability to fulfil them. Next, the selection of fibres, resins and fabric layers takes place; in this process the quality of the carbon and the arrangement of the fibre layers play an important role. It is important to find the right set-up for the project at hand and the intended location or rather the area of application. It is often necessary to differentiate from model to model at several points. In the final step, attention is paid to processing the material in a way that allows the desired advantages in terms of low weight, rigidity and stability to be achieved.

FSR
The Specialized FSR linkage design is based on a four-joint design with Horst Link in the chainstay, which separates the seat stay from the main pivot point of the rear triangle. This allows the pedal and brake force to be decoupled from the suspension, so that the compression and rebound are solely dependent on the nature of the terrain. This not only converts more energy into forward drive which is direct and without rocking, but also leads to more traction and thus more control. In addition, the FSR system can be fine-tuned to all the possible areas of applications and terrains.

SWAT
SWAT is the acronym for " Storage, Water, Air, Tools" and describes a whole range of solutions that Specialized offers for space-saving accessories. There are SWAT elements that are built into Specialized frames from the get-go, such as the opening below the bottle cage on certain mountain and gravel bikes. And there are SWAT components which can be retrofitted to any wheel, e.g. the Conceal Carry Tool or the EMT Cage Mount Tools for SWAT bottle cages. The aim is to always use an existing, unused space to carry accessories such as drinking bottles, inner tubes, tools or CO2 cartridges, while being within easy reach, in a safe space and without impairing the aerodynamics. This often results in backpacks or bags being out of the question and emergency solutions such as spare tubes tied to the frame are something that everyone wants to avoid.

Geometry:

(based on a fork axle to crown length of 581 mm)
S3:

Recommended Height:

165 - 180 cm

Stack:

620 mm (Low)

Reach:

464 mm (Low)

Seat Tube Length:

420 mm

Effective Top Tube Length:

619 mm

Head Tube Length:

100 mm

Chainstay Length:

442 mm

Wheelbase:

1246 mm

Bottom Bracket Height:

347 mm (Low), 354 mm (High)

BB Drop:

28 mm (Low), 21 mm (High)

Seat Tube Angle:

76°

Head Tube Angle:

63.9° (Low), 64.3° (High)

Stem Length:

50 mm

Handlebar Width:

800 mm

Crank Arm Length:

170.0 mm

Saddle width:

143 mm

Seatpost adjustment travel:

180 mm

S4:

Recommended Height:

173 - 188 cm

Stack:

629 mm (Low)

Reach:

487 mm (Low)

Seat Tube Length:

440 mm

Top Tube Length:

644 mm

Head Tube Length:

110 mm

Chainstay Length:

442 mm

Wheelbase:

1274 mm

Bottom Bracket Height:

347 mm (Low), 354 mm (High)

BB Drop:

28 mm (Low), 21 mm (High)

Seat Tube Angle:

76°

Head Tube Angle:

63.9° (Low), 64.3° (High)

Stem Length:

50 mm

Handlebar Width:

800 mm

Crank Arm Length:

170.0 mm

Saddle width:

143 mm

Seatpost adjustment travel:

180 mm

S5:

Recommended Height:

175 - 193 cm

Stack:

638 mm (Low)

Reach:

511 mm (Low)

Seat Tube Length:

465 mm

Top Tube Length:

670 mm

Head Tube Length:

120 mm

Chainstay Length:

442 mm

Wheelbase:

1302 mm

Bottom Bracket Height:

347 mm (Low), 354 mm (High)

BB Drop:

28 mm (Low), 21 mm (High)

Seat Tube Angle:

76°

Head Tube Angle:

63.9° (Low), 64.3° (High)

Stem Length:

50 mm

Handlebar Width:

800 mm

Crank Arm Length:

170.0 mm

Saddle width:

143 mm

Seatpost adjustment travel:

210 mm

Manufacturer Number:

satin doppio-sand:

93622-310

Shipping Notice:

The shipment is sent pre-assembled by a forwarding agent.
The delivery time is extended by 2-5 days, depending on the overall volume of orders.
For individual consultation, please contact our customer service team.

Contents:

• 1 x Specialized Enduro Expert Carbon 29" mountain bike