OneUp Components Dropper Post V2 180 mm

OneUp Components 180 mm Dropper Post - easier to adjust

With the OneUp Components Dropper Post V2 you get the completely revised version of the previous OneUp Dropper Post, a 2.0 version if you will. The travel - a maximum of 180 mm in this case - can be reduced by 10 mm or by 20 mm. OneUp Components was obsessed with trying to scrape off as many millimetres as possible from the dropper post to keep the stack height very low and the overall length very short. With this post you can adjust your saddle as low as never before.
The dropper is controlled via cable (remote not included), includes the metal pins for individual adjustment of the travel and of course the reliable sealed cartridge.
In contrast to a hydraulic seatpost, the OneUp dropper post works regardless of the outside temperature. Also: If the remote is damaged, you can still use it by removing it from the frame and operating the adjuster by hand.
Unlike earlier versions, this Dropper Post can even be installed in Santa Cruz bikes with Lower Link VPP damper linkage.
Do you want more from your dropper post? Then do the right thing and get one from OneUp.

Specifications:

Application:

All Mountain, Enduro

Stroke:

180 mm

Diameter:

30.9 mm, 31.6 mm, 34.9 mm

Length:

465 mm

Setback:

0 mm

Technical Information:

Actuation:

mechanical handlebar remote

Cable Routing:

internal

Clamp:

2-bolt clamp

Compatible Saddle Rails:

7 x 7 mm (standard), 7 x 9 mm (oval)

Material:

aluminium

Approved For:

Weight Limit:

125 kg

Insertion Depth (max.):

252 mm (267 mm with actuator)

Insertion Depth (min.):

120 mm

Features:

• tons of travel (max. 180 mm) with a 213 mm stack height and a 465 mm effective length (without actuator = 15 mm)
• 345 mm maximum extension length
• travel can be adjusted by 10 or 20 mm by using metal pins that are placed in guide track (3 for 10 mm, 2x3 for 20 mm)
• cable actuated for easy installation
• reliable, sealed cartridge
• cartridge can be replaced by user
• easy to maintain at home
• compared to previous model, has a lower total length and stack, also less weight
• new DU bushing
• increased bushing overlap for increased durability
• Actuator V2.1 compatible with Santa Cruz Lower Link VPP

Models:

30.9 mm / 465 mm / SB 0 mm:

Diameter:

30.9 mm

Length:

465 mm

Setback:

0 mm

Manufacturer Number:

1C0575

31.6 mm / 465 mm / SB 0 mm:

Diameter:

31.6 mm

Length:

465 mm

Setback:

0 mm

Manufacturer Number:

1C0576

34.9 mm / 465 mm / SB 0 mm:

Diameter:

34.9 mm

Length:

465 mm

Setback:

0 mm

Manufacturer Number:

1C0661

Contents:

• 1 x OneUp Components Dropper Post V2, 180 mm
• 6 x 10 mm metal pins
• 1 x grease for tubes and seals
• 1 x cable clamp sleeve

Order Together:

• V3 Handlebar Remote