Shimano XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit

Item number: 71595
3
3
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
XT BR-M8100 Disc Brake Set w/ Sintered Pads J-Kit - black/set (front+rear)
  • 100 day return period
  • Online since 1998
  • Trusted Shop 4.89 / 5.00

Shimano XT BR-M8100 disc brake set - completely focused on the trail


Shimano XT BR-M8100 is a two-piston disc brake set with sintered brake pads specially designed for Cross Country applications. The brake callipers feature excellent brake control and a simple connection system. The I-Spec EV compatible BL-M8100 brake levers are mounted at an angle to provide an additional contact point. This increases stiffness and provides more direct feedback. In addition, Shimano Servo Wave increases braking power: more performance is available with shorter empty travel.

Specifications:


Series: Deore XT M8100
Application: Cross Country
Type: hydraulic, 2 pistons
Actuation: mineral oil
Hose: SM-BH90-SBM
Hose Length (Front/Rear): 1000 mm/1700 mm

Technical Information - Caliper:


Caliper Mount: post mount
Pads: sintered with cooling fins
Design: 2-piece
Calliper Material: Aluminium
Piston Material: Ceramic
Hose Connection: banjo

Technical Information - Lever:


Lever Length: 2-finger
Adjustment Options: reach adjust (no tools required), contact point
Mount: clamp (split), I-Spec EV
Design: right (side-specific), left (side-specific)
Brake Lever Material: Aluminium
Brake Lever Housing Material: Aluminium
Hose Connection: straight

Compatibility:


Mounting Position:
- front brake caliper: brake lever left
- rear brake caliper: brake lever right
Brake Rotor: 140 mm, 160 mm, 180 mm, 203 mm, 220 mm (recommended: RT-MT800)
Pads: organic and sintered; with narrow pad shape; standard and Ice Tech brake pads

Features:


Brake Caliper:
- excellent brake control helps you to focus on the trail
- lightweight 2-piston system (ceramic)
- easy and quick installation
- painted
- steel bolts (5 mm)

Brake Lever:
- optimised lever axis position with additional contact point and revised ergonomics
- flexible, action-optimised cockpit layout thanks to I-Spec EV
- rotation adjustment angle for compatible shift lever: 20°
- 10 % stiffer than M8000, even when hot
- faster braking with less empty pull
- funnel venting with M5 funnel
- anodised lever, painted body
- stainless steel clamp bolts

Technology:


Servo Wave
Servo Wave optimises the leverage of your brake levers. During the braking process, the brake pads are guided quickly to the brake rotor with very short lever travel. The greater part of the lever travel is reserved for the actual braking force. This technology allows you to control your braking force more precisely and to apply it more effectively.

I-Spec EV
I-Spec EV describes a variant of the connection between brake lever and shifter in MTB drivetrains. This type of mount allows the shifter to be adjusted both horizontally and vertically in relation to the brake lever and keeps the cockpit tidy by reducing the number of clamps needed. Compared to I-Spec and I-Spec II, I-Spec EV offers a much wider adjustment range. 14 mm adjustment range the longitudinal direction and up to 60° rotation allow an optimal ergonomic adjustment to your riding style, your sitting position and your anatomy.

One-Way-Bleeding
One Way Bleeding is a technique used on the brake calliper that makes it easier to bleed the brake. The hose routing has been optimised so that no air bubbles remain in the brake calliper. In combination with the funnel, the brake can be bled cleanly and easily.

J-Kit
J-Kit is a simple hose connection system for hydraulic brakes on internally routed hoses so that you can install your brake quickly and easily. The brake hose does not come connected to the brake to facilitate the routing of the hose in the frame. The brake hose is already filled with oil in the J-Kit and sealed with a thin membrane. There is a small pin in the J-Kit brake lever that pierces this diaphragm during assembly to allow oil to flow.

Manufacturer Number:


I-M8100JLFPNA100 + I-M8100JRRXNA170

Contents:


- 2 x Shimano XT BR-M8100 + BL-M8100 disc brakes, front & rear
- 1 x Shimano SM-BH90-SBM brake hose, 1000 mm (front)
- 1 x Shimano SM-BH90-SBM brake hose, 1700 mm (rear)
- 2 x pairs Shimano brake pads
- 2 x inserts
- 4 x calliper bolts
- 2 x snap ring
- 2 x olives (assembled)
- ready for installation, filled, bleeding is recommended after installation

Order Together:


- Adapter for PM non-direct mount and IS mount
- TL-BH61 tool for insert installation
- Bleed Block Y-8J712000


Models:

  • black/set (front+rear), in stock
    167.22€

Customer Reviews (3)

5

Customer Reviews (3)

5.0/5.0
5
3
4
0
3
0
2
0
1
0

Give us your opinion on this product.

by TRIANTAFYLLOS P.  on 18.05.2022
verified purchase

i have been using them for 1 month...
great break...lots of stopping power.

Is this review helpful?

Give us your opinion on this product.