- 100 day return period
- Online since 1998
- Trusted Shop 4.89 / 5.00
Stages Shimano XTR M9120 Power LR power meter crankset - power measurement left and right
The Stages Shimano XTR M9120 Power LR power meter crankset with 32 tooth chainring includes two power meters - one pre-installed on the left and one pre-installed on the right crank arm. This allows the power output of both legs to be determined independently. Each Stages Power individually calibrated, resulting in a sensational measuring accuracy of +/- 1.5 %. Active Temperature Compensation (ATC), which eliminates possible influences of environmental conditions, is central to the determination of correct performance data. It's not for nothing that cyclists of various disciplines, including many cycling pros, have relied on Stages Power technology for years. With the purchase of a Power LR XTR M9120 power meter crankset you will receive two months of premium access to the training platform Stages Link for free.
Information regarding the return of batteries and electrical equipment:Information on the return and disposal of used batteries and electrical equipment can be found here.
- Enduro, All Mountain
- power meter crankset (dual-sided)
- Shimano 1x12-speed
- Chainring Mount:
- Shimano Direct Mount
- Crank Arm Material:
- Chainring Material:
- Axle Material:
- Crank Arm Length:
- 170.0 mm, 175.0 mm
- 52 mm
- 168 mm
- Axle Diameter:
- 24 mm
- Compatible BSA Shell Width:
- 68 mm, 73 mm
- Recommended Bottom Bracket:
- SM-BB93 or SM-BB94-41A Pressfit Hollowtech II
- +/-1.5 percent
- Point of Measurement:
- crank arm
- Power Source:
- 2 x button cell CR2032
- Battery Life:
- min. 175 hours
- Data Collected:
- cadence (20-220 rpm), power (0-2500 W), pedal stroke, torque
- Data Transfer:
- ANT+, Bluetooth
- compatible with Shimano XTR M9120 MTB groupsets
- with included spacers to compensate for the different axle lengths also compatible with XTR M9100 groupsets
- compatible with most frame models, see Stages Support website
- compatible software: Stages Link, Training Peaks, Strava, Garmin Training Center etc.
- power measurement on both sides (sensor on left crank arm + sensor on drive side)
- 2 independent power meters included (2 bikes could be equipped with one-sided measurement)
- flat design with robust connection between battery cover and housing
- battery service by user: tool-free battery change on left crank arm, battery change on drive side using Phillips head screwdriver
- active temperature compensation
- built-in cadence sensors, no magnet necessary
- integrated LED display displays battery status and calibration result
- improved acceleration sensor and additionally integrated ring laser for improved cadence resolution
- wireless firmware update via Stages App
- Near Field Communication (NFC) with Tap-To-Pair for easy connection to many smartphones and other devices
- improved Bluetooth and ANT+ antennas increase data transmission strength by a factor of 6
- additional weight left: 15 g, additional weight right: 20 g
Technology:Stages Power Meter
No moving parts and all packed under an extremely stable ABS-PC case - the Stages power meter does not damage the structure and therefore the stability of the crank arm. It adds the ability to measure power to the crank.
Power is the measurement of the mechanical work you do on the bike and the most accurate way to measure your effort. In contrast to heart rate, which is highly dependent on physiological influences such as stress, lack of sleep, caffeine, ambient temperature, time of day, fluid balance and other factors, performance shows exactly how much work you do and how effective your training is. Performance measurement is the perfect tool to understand what progress you make during training, but also how performance levels and fatigue develop. Simply put - if you want to know how in shape you are, test your power.
The cadence and torque data acquired (see below) are multiplied to determine the power of one pedal revolution.
In order to measure the torque, strain gauges specially developed by Stages are applied precisely along the crank arm. Strain gauges, which are also used in a similar form in space travel, can detect the smallest of bends even in the stiffest crank. Each pedal revolution causes a minimal bend along the crank arm. This downwards directed force occurs at each revolution. Multiplying this force by 9.8 m/s2 and the length of the crank arm gives the force applied per pedal revolution - this is the torque.
The Stages power meter measures cadence using an accelerometer (same technology that allows smartphones to adjust the display depending on position). The accelerometer is part of the specially designed electronic circuit board, eliminating the need for outdated magnets, external sensors and cable ties to measure cadence. This state-of-the-art technology also allows the power meter to detect the position of the crank several times per revolution. This results in faster information transfer and better performance data.
Active Temperature Compensation (ATC)
Stage power meters are equipped with active temperature compensation (ATC). Different temperatures cause strain gauges to expand or contract by a certain amount. ATC allows the power meter to compensate for temperature changes that would otherwise affect the strain gages and their ability to accurately measure forces. The most important thing is that Stages ATC works automatically and continuously while riding - so you don't have to stop pedalling.
ANT+ / Bluetooth Transmission
The Stages power meter was the first power meter on the market to use Bluetooth smart transmission in addition to ANT+.
- enables bidirectional communication between the Stages power meter and a smartphone or Bluetooth enabled bike computer
- sends more data per second to end devices compared to ANT+
- makes every Stages power meter fit for the future, as updates are possible wirelessly
- no need for cables or external ports - simply update your firmware from your smartphone
- load training sessions from your smartphone easily and directly to Strava or TrainingPeaks.
ANT+ is the gold standard for wireless communication in the cycling and fitness industry. The system is simple, robust and allows cyclists to add performance measurement to the ANT+ enabled bike computer.
Make your power meter fit for the future. The data recorded by your Stages power meter can be transferred directly to the StagesPower App. Use the app to update your firmware and have access to innovations. Check if new firmware versions are available. Perform a zero point calibration of the power meter using the app. Track power and cadence. Observe the battery level of the power meter. In addition, high-speed data recording is available, which impressively demonstrates the sensitivity of the Stages power meter and enables scientific data acquisition.
Stages Link offers cyclists at all levels of performance individual coaching and knowledge transfer tailored to the needs of each athlete. As a desktop application or app, Stages Link is the hub of cloud-based coaching, knowledge platform, training analysis and a tool for maintaining your training equipment, developed in close collaboration with Today's Plan analysis specialists. Stages Link customises training plans down to individual training units to optimise the performance of athletes and enable them to achieve their goals. Stages Link also helps you quickly set up your Stages Dash bike computer and check your Stages power meter, but is also compatible with devices from other manufacturers. Get access to Stages Link for two months free when you purchase a Stages Dash computer. Access to basic functions is always free.
- 170.0 mm:
- 175.0 mm:
Contents:Stages Power LR Shimano XTR M9120, consisting of:
- 1 x Stages Shimano XTR M9120 crankset (32 tooth) with power meter left and right
- 2 x CR2032 batteries
- 2 x spacers